User's Manual

7. When the second half data transfer is completed, the LED turns off and “END” is displayed. Press [MONI],

radio returns to Clone Mode and you can clone another radio or press [MONI] to return to Dealer Mode.

Target Side

Operation

1. Turn POWER ON while pressing [LAMP] and

[

○

]

key, in about 2 seconds radio enters the Dealer Mode. Then press

[MONI] to enter Wireless Clone Mode. The frequency displayed on LCD is the initial frequency matching the

destination.

2. The display changes to “00 CLONE” or “50 CLONE” correspondingly when the radio receives data from the master

and the BUSY mark appears. The leftmost digits (00) or (50) on the LCD show the data transfer rate and as data

reception proceeds, the digits count upwards in increments of 1.

3. When all data is received, “END” displays. The display of first half and second half transfer is shown as following

respectively.

4. When “END” displays, the next operation is same as the source side operation 4.

Please confirm the following operations:

Clone Mode

[Receive DTMF Data]

Clone Mode

[Data receive complete]

Clone ModeClone Mode

Clone Mode

[Receive DTMF Data]

Clone Mode

[Data receive complete]

Clone Mode Clone Mode