User's Manual

22
(1) Attach the antenna to the source radio.
(2) Remove the antenna from the target radio.
(3) Keep radios as close as possible.
Note:
During cloning do not execute any action that might interrupt the cloning such as shutting off power.
TEST MODE
Menu Mode
1. Turn the power ON while pressing [LAMP] and
[
■
]
key, in about 2 seconds the radio enters Test Mode and LCD
displays “TEST”. After two seconds, the first setting option “ADJUST” is displayed on LCD. Turn Channel Selector
knob to select from the following menu:
ADJUST
FREQ TST
TUNE CLN
FULL LCD
DEST SET
2. Press
[
□
]
key to enter Adjustment Mode, Frequency Test Mode, Adjustment Data Clone Mode, LCD Full Screen
Mode or Destination Set Mode.
3. Press
[
■
]
key to return to the Menu Mode.
LCD Full Screen Mode
1. Turn the power ON while pressing [LAMP] and
[
■
]
key simultaneously, in about 2 seconds the radio enters the menu of
Test Mode.
2.
Turn Channel Selector knob to select the setting option:
“FULL LCD”.
3. Now press
[
□
]
key to enter LCD Full Screen Mode.
4. Press
[
■
]
key to exit from LCD Full Screen Mode. LCD displays “FULL LCD”.
Adjustment Data Clone Mode
1.
Turn the power ON while pressing [LAMP] and
[
■
]
key, in about 2 seconds the radio enters the menu of Test
Mode.
2.
Turn Channel Selector knob to select the setting option “TUNE CLN”.
LCD Full Screen ModeTest Mode
[ ¡ ö ]
[ ¡ õ ]