User's Manual

12 480 √ √ √ √ 45.05 1 480 470 490

13 490 √ √ √ √ √ 46.35 1 490 480 500

14 360 √ √ 46.35 1 360 350 370

15 380 √ √ 45.05 1 380 370 390

Note: About busy channel lockout

1: Transmission is prohibited if a signal appears with incompatible CTCSS/CDCSS;

2: Transmission is prohibited if a signal appears with incompatible CTCSS/CDCSS or DTMF/2-Tone.

ALL RESET MODE

Operation

1. Turn POWER ON while pressing [LAMP] and [

○

] key, in about 2 seconds, the radio enters the Dealer Mode.

2. In dealer mode, press [PTT] and [

□

] key simultaneously to enter All Reset Mode. The EEPROM data is reset. No

change displays on LCD, and red LED glows.

3. The LED turns off when All Reset is completed.

PC MODE

Connection procedures

1. Connect the radio of RPV599APlus/RPU499APlus to the personal computer with an interface cable.

2. Run the program on the computer and Turn ON the power of the radio.

3. You can read, programme or adjust the radio via RPV599APlus/RPU499APlus programming software.

Please refer to “RPV599APlus/RPU499APlus Editing Software User Manual” for details.

Red LED onRed LED off

All Reset Complete

All Reset

Dealer Mode

[PTT]+[LO]

[

PTT

]

[

□