User's Manual

8
Prohibit entering dealer mode and test mode
 Dealer mode and test mode can be prohibited by programming to prevent users from changing the parameters with self-
programming feature or with external programmer.
 Cancel the Prohibit
Short the dealer mode control point and the test mode control point and then the prohibit will be cancelled at
POWER-ON. Or use the programming software to cancel.
Note:
The dealer mode control point and the test mode control point locate over LCD and marked with SELF.
DEALER MODE
Self-Programming (Function Setting)
1. Turn on the power while pressing [LAMP] and
[
○
]
key
, in 2 seconds the radio enters the dealer mode, and “SEL”
appears on LCD.
Note: please refer to the notes of self-programming mode.
2. In dealer mode, press
[
●
]
key to enter function set mode.
3. Use Channel Selector knob to set functions ON or OFF or to select the setting.
4. After a function is set, press [PTT] to store the setting and the menu goes to the next function option.
MODE Key Remarks
USER
MODE
Conventional Mode POWER ON Turn on the power to enter Conventional Mode
Function Set Mode
While holding down [LAMP] and
[
○
]
key simultaneously, turn on the
power (in 2 seconds)
Press
[
●
]
key to enter Function Set Mode.
DTMF Set Mode As above
Press
[
○
]
key to enter DTMF Set Mode.
Channel Set Mode As above
Press
[
■
]
key to enter Channel Set Mode.
New function set
mode
As above
Press
[
□
]
key to enter New Function Set Mode.
Wired Clone Mode As above Press [LAMP] to enter Wired Clone Mode.
Wireless Clone
Mode
As above Press [MONI] to enter Wireless Clone Mode.
DEALER
MODE
All Reset As above
Press
[
□
]
key and [PTT] simultaneously.
Menu Mode
While holding down [LAMP] and
[
■
]
key simultaneously, turn on the
power (in 2 seconds).
Press
[
□
]
key to enter test mode and
[
■
]
key to
return to Menu Mode.
Adjustment Mode Select “ADJUST” in menu mode.
Frequency Test
Mode
Select “FREQ TST” in menu mode.
Adjustment Data
Clone Mode
Select “TUNE CLN” in menu mode.
LCD Full Screen
Mode
Select “FULL LCD” in menu mode.
TEST
MODE
Destination Set
Mode
Select “DEST SET” in menu mode.
Press
[
□
]
key to enter the mode and
[
■
]
key to exit.