User's Manual

9
5. Press
[
●
]
key to return to Dealer Mode from current option, and the current data shown on the display will not be
stored.
6. Press [PTT] to store current function setting and a beep will sound to confirm the action.
7. END appears when settings in function mode are completed.
Function
No.
Function
Name
Settings (Defaults are
underlined)
Display Remarks
OFF
MONI OFF Invalid
Monitor Momentary MONI 1
Signaling squelch is temporarily disabled while [MONI]
button is held down.
Monitor Lock MONI 2
Signaling squelch is temporarily disabled while [MONI]
button is pressed. Each time press can toggle between
squelch disable and enable.
1 MONITOR
SQ OFF
Momentary
MONI 3 Squelch is disabled while [MONI] button is held down.
OFF SCAN OFF Invalid
CO SCAN CO “Carrier Operated” function
2 SCAN
TO
SCAN TO “Time Operated” function
Disable DIAL OFF Disables the [DIAL] key.
3 [DIAL]
Enable
DIAL ON Enables the [DIAL] key.
Disable TARE OFF Invalid
Talk Around TARE TA “Talk around” function is enabled
4
TALK
AROUND
Reverse
TARE RE “ Frequency Reverse” function is enabled
Disable LO OFF Disables [LO] key.
5 [LO]
Enable
LO ON Enables [LO] key.
OFF
PRIO OFF NO priority setting
Fixed PRIO FIX Fixed priority channel
6 PRIORITY
Selected
PRIO SEL Variable priority channel
PRICH 1
7
PRIORITY
CHANNEL
1 ~ 99 1
PRICH 99
Priority channel
(Only valid when “fixed priority” is enabled)
LBA 300
8
LOOK BACK
A
0.3s ~1.5s 0.5s
(0.1s/1STEP)
LBA 1500
The period time between radio back scanning a priority
channel from a normal channel when there is no activity
on priority channel
9
LOOK BACK
B
0.5s ~ 5.0s 2.0s
(0.5s/1STEP)
LBB 500
The period time between radio back scanning a priority
channel from a normal channel when there is activity on
priority channel but not matching its signaling.
Selected
REV SEL Channel where scan starts.
Last Call REV LSTC
During scanning, it’s the latest channel at pause; during
scan stopping, it’s the channel stopped; if scan never
stops, it’s the start channel.
Last Used REV LSTU
During scanning, it’s the latest transmit channel; during
scan stopping, it’s the channel stopped; if scan never
stops, it’s the start channel.
10
REVERT
CHANNEL
Selected + Talk Back
SEL TALK
During scanning, it’s the start channel; during scan
stopping, it’s the channel stopped.
Priority REV PRIO Priority channel
Priority + Talk Back
PRI TALK
During scanning, it’s the priority channel; when scan
stopping, it’s the channel stopped.
TSDT 0.5
Duration before scan restarts when it stops by
transmission.
11
TX-SCAN
DWELL
TIME
0.5s ~ 5.0s 3.0s
(0.5s/1STEP)
TSDT 5.0
12
DROP OUT
DELAY TIME
0.5s ~ 5.0s 3.0s
(0.5s/1STEP)
DODT 0.5
Duration before scan restarts when it stops by signal
input.
DODT 5.0