User's Manual

PRELIMINARY
PRELIMINARY PRELIMINARY
PRELIMINARY –
––
– Service Manual
Service ManualService Manual
Service Manual
DR• CHKD• APPD•
45
1.CH: TX center,
turn to channel 9 in
manual mode
Adjust it to:0.75kHz±50Hz Wide
13.QT DEV
2.CH: TX center,
turn to channel 10
in manual mode
Adjust it to:0.35kHz±50Hz Narrow
1.CH: TX center,
turn to channel 11
in manual mode
Adjust it to:0.75kHz±50Hz Wide
14.DQT DEV
2.CH:TX center,
turn to channel 12
in manual mode
Synthetical
test
LPF:300Hz
ANT
PTT•up•MO
NI•down•
Adjust it to:0.35kHz±50Hz Narrow
15.Low
Battery level
Turn to channel 3 in
manual mode,
Adjust the battery
to 5.8V
Digtal
voltmeter
PTT•up•MO
NI•down•
Adjust so that the LED flashes
Notice
NoticeNotice
Notice：
：：
：In manual mode , channel selector 1
In manual mode , channel selector 1In manual mode , channel selector 1
In manual mode , channel selector 1-
--
-12
1212
12，
，，
，M
MM
MIC
ICIC
IC can
can can
can’
’’
’t connect line
t connect linet connect line
t connect line，
，，
，after
after after
after
adjust complete
adjust completeadjust complete
adjust complete，
，，
，short
short short
short SELF
SELFSELF
SELF，
，，
，enter mode setting
enter mode settingenter mode setting
enter mode setting，
，，
，press
press press
press PTT
PTTPTT
PTT，
，，
，disable manual
disable manual disable manual
disable manual
adjust.
adjust.adjust.
adjust.