User's Manual
Table Of Contents
- WELCOME
- INTRODUCTION
- Optional Accessories
- External Speaker/Microphone
- External VOX Headset
- Battery Packs
- FCC REQUIREMENTS
- SAFETY PRECAUTIONS
- Dealer Programmable Options
- Before Using Your Radio
- Battery Installation and Removal
- Antenna Installation and Removal
- Radio Views
- Aurora Radio Controls
- Front View
- Display
- Backlight
- Keypad
- Speaker
- Top View
- Status Indicator
- On/Off Volume Knob
- Squelch Knob
- Programmable Three-Position Switch
- Emergency Button
- Channel Selector Knob
- Side Views
- PTT Switch
- Programmable Softkey Buttons
- Options Connector
- Basic Operation 23
- TRANSMIT
- Code Guard Operation
- Code Guard Receive
- Code Guard Transmit
- Scan Operation
- Talkback Scan
- Scan All Groups
- Change the Scan List
- Scanning Options
- Scan Delay
- Talk Around
- Scan in Tone Mode
- Scan in Monitor Mode
- Transmit on Priority Channel
- Channel Scan Delete/Add
- Priority Scan
- Priority Scan with Code Guard
- Priority Modes
- Priority Delay
- Priority Receiving
- Priority During Scan-All-Groups Scanning
- Receive Mode
- Groups
- Display Modes
- Tuning Range
- Frequency Display Mode
- Alpha Display Mode
- Channel Display Mode
- Selective Calling
- Receiving a Call
- Sending a Call
- Radio Check
- DTMF Dialing
- Originating a Call
- Frequently Called Numbers and Call Paging
- Radio Paging
- Flex Mode
- Keypad and Channel Selector Lock
- Busy Channel Lockout
- Battery Power
- Battery Saver
- Radio Power-Up
- Error Messages
- Stun
- Aurora Programmed Switch Settings
- Troubleshooting Guide
- Service
- _
- Specifications
- Definitions and Acronyms
32
BK Radio
FUNCTION MENU
Any functions not assigned to a side button or
the three-position toggle switch can be
enabled/disabled with
or
on the keypad.
You can use the function menu as follows:
1. Press
or
to display the function
menu.
2. Use the
or
keys to move from one
function to the next forward or backward.
You will hear a beep with each key press. If
you press an invalid key, however, you will
hear a boop.
3. Press [H]ome to exit the function menu.
If the function menu is on Radio Page,
press [H]ome twice slowly to exit.
4. Press [H]ome twice to quickly clear the
radio page number. The radio then waits
for you to enter the new number.
Note: Any functions assigned to the
three-position switch or the three buttons
on the side of the radio, that function is
not displayed in the function menu.
Mode Selections
Press [E]nter to toggle the following
factory-default mode selections:
• Call DTMF/5 Tone • Scan All
• Monitor/Tone • Key Beep
• Back Light • Power Hi/Low
• Priority • Programming
• Talk Back (for dealers only)
• Talk Around • Frequently called
• Manual/Scan number list