User's Manual
Table Of Contents
- WELCOME
- INTRODUCTION
- Optional Accessories
- External Speaker/Microphone
- External VOX Headset
- Battery Packs
- FCC REQUIREMENTS
- SAFETY PRECAUTIONS
- Dealer Programmable Options
- Before Using Your Radio
- Battery Installation and Removal
- Antenna Installation and Removal
- Radio Views
- Aurora Radio Controls
- Front View
- Display
- Backlight
- Keypad
- Speaker
- Top View
- Status Indicator
- On/Off Volume Knob
- Squelch Knob
- Programmable Three-Position Switch
- Emergency Button
- Channel Selector Knob
- Side Views
- PTT Switch
- Programmable Softkey Buttons
- Options Connector
- Basic Operation 23
- TRANSMIT
- Code Guard Operation
- Code Guard Receive
- Code Guard Transmit
- Scan Operation
- Talkback Scan
- Scan All Groups
- Change the Scan List
- Scanning Options
- Scan Delay
- Talk Around
- Scan in Tone Mode
- Scan in Monitor Mode
- Transmit on Priority Channel
- Channel Scan Delete/Add
- Priority Scan
- Priority Scan with Code Guard
- Priority Modes
- Priority Delay
- Priority Receiving
- Priority During Scan-All-Groups Scanning
- Receive Mode
- Groups
- Display Modes
- Tuning Range
- Frequency Display Mode
- Alpha Display Mode
- Channel Display Mode
- Selective Calling
- Receiving a Call
- Sending a Call
- Radio Check
- DTMF Dialing
- Originating a Call
- Frequently Called Numbers and Call Paging
- Radio Paging
- Flex Mode
- Keypad and Channel Selector Lock
- Busy Channel Lockout
- Battery Power
- Battery Saver
- Radio Power-Up
- Error Messages
- Stun
- Aurora Programmed Switch Settings
- Troubleshooting Guide
- Service
- _
- Specifications
- Definitions and Acronyms
39
Aurora User’s Manual
Three seconds before starting the
man-down emergency sequence, you will
hear the man-down audible warning (a
fast-rate warbling lasting 3 seconds). If you
put the radio upright during the man-down
audible warning, the radio stops the
emergency sequence. If the radio stays
tilted for the duration of the man-down
audible warning, the emergency sequence
is immediately activated.
Enabling/Disabling
You can enable or disable the man-down
emergency mode either with the softkey/
three-position switch assigned to the
man-down function or with the function
menu. As long as the man-down switch is
factory installed, even if your dealer didn’t
program the emergency button to be used
for the emergency feature, the man-down
emergency feature remains available.
Transmit Speed and Frequency
The emergency feature, when activated,
transmits the radio’s emergency ANI up to
five times at 15-second intervals until the
radio emergency is acknowledged by the
dispatcher (by sending the radio’s ANI).
If the radio does not receive an emergency
acknowledgment, the emergency ANI
sequence is transmitted up to another five
times at 15-second intervals, except this
time the radio waits for an inactive
emergency channel condition before
transmitting.