User's Manual
Table Of Contents
- WELCOME
- INTRODUCTION
- Optional Accessories
- External Speaker/Microphone
- External VOX Headset
- Battery Packs
- FCC REQUIREMENTS
- SAFETY PRECAUTIONS
- Dealer Programmable Options
- Before Using Your Radio
- Battery Installation and Removal
- Antenna Installation and Removal
- Radio Views
- Aurora Radio Controls
- Front View
- Display
- Backlight
- Keypad
- Speaker
- Top View
- Status Indicator
- On/Off Volume Knob
- Squelch Knob
- Programmable Three-Position Switch
- Emergency Button
- Channel Selector Knob
- Side Views
- PTT Switch
- Programmable Softkey Buttons
- Options Connector
- Basic Operation 23
- TRANSMIT
- Code Guard Operation
- Code Guard Receive
- Code Guard Transmit
- Scan Operation
- Talkback Scan
- Scan All Groups
- Change the Scan List
- Scanning Options
- Scan Delay
- Talk Around
- Scan in Tone Mode
- Scan in Monitor Mode
- Transmit on Priority Channel
- Channel Scan Delete/Add
- Priority Scan
- Priority Scan with Code Guard
- Priority Modes
- Priority Delay
- Priority Receiving
- Priority During Scan-All-Groups Scanning
- Receive Mode
- Groups
- Display Modes
- Tuning Range
- Frequency Display Mode
- Alpha Display Mode
- Channel Display Mode
- Selective Calling
- Receiving a Call
- Sending a Call
- Radio Check
- DTMF Dialing
- Originating a Call
- Frequently Called Numbers and Call Paging
- Radio Paging
- Flex Mode
- Keypad and Channel Selector Lock
- Busy Channel Lockout
- Battery Power
- Battery Saver
- Radio Power-Up
- Error Messages
- Stun
- Aurora Programmed Switch Settings
- Troubleshooting Guide
- Service
- _
- Specifications
- Definitions and Acronyms
56
BK Radio
SELECTIVE CALLING
Radio Paging Code
Your dealer can program your radio to
decode 2-tone, 5-tone and DTMF ANIs, and
encode 5-tone and DTMF ANIs.
Receiving a Call
With the radio in receive mode, the squelch
will only open when it receives an ANI code
that is identical to its own ANI code.
• 2-Tone Decoding
The Aurora radio is capable of receiving
and decoding 2-tone-sequential paging.
Your dealer can program the tone
frequencies to cover Motorola 1+1, Reach
Two Tone, and GE Type 99 formats. The
dealer can also program tone duration and
intervals down to a zero interval. The radio
has the capability to decode RELM All Call
on either Tone A or Tone B. The 2-tone
page causes an audible warbling
notification.
•
ANI Decoding (Receive ANI)—DTMF
or 5 Tone
The Aurora radio can have up to five
separate ANI page codes (each up to 10
digits) that can be assigned to a channel’s
receive frequency for general paging.
The paging codes are:
• Unit ID
• Group ID
• All Call ID
• Stun ID
• Radio Check ID