User Manual

14 BK Radio
2. Press a number key for the new group
number. Only valid group entries will be
accepted.
When changing groups, invalid entries will
not be accepted, and the radio remains in
the previously selected group.
3. Press the [ENT] key or wait 5 seconds.
The radio returns to normal operation for
the new group, and the selected channel
is displayed. All selected scanning and
priority functions affect only the channels
in the group you are operating in.
GROUP SELECTOR. Knob positions
1–16 select groups 1–16:
1. Press [#] twice to select a channel.
2. Press a number key for the new channel
number.
3. Press the [ENT] key or wait 5 seconds.
The radio returns to normal operation for
the new channel, and the selected
channel is displayed.
CUSTOM SELECTOR. Your dealer will
provide you with the pre-programmed
Group/Channel combinations for your radio.
If a knob position is programmed to allow
selection of the group and/or channel with the
keypad:
1. Press [#].
2. Press the number of the group you want
to change to.
3. Press [#] again.
4. Press the number of the channel you want
to change to.
5. Press the [ENT] key or wait 5 seconds.
The radio returns to normal operation for
the new channel, and the selected
channel is displayed.
1 2 3
4 5 6
7 8 9
0
*
#
CLR
FCN
PRI
ENT
DPH Owner’s Manual 31
CG
LABE
L
5
Use Channel 9
Channel Guard Values
For Channel 5
For example, to use the Channel Guard
values of Channel 9 with the frequencies of
Channel 5:
1. Slide Switches B and C down.
2. Turn the channel selector knob to Channel
5.
3. Press the [9] key on the keypad. The
display shows CG.
The radio will now operate on the
frequencies of Channel 5 with Channel 9
Channel Guard values. The display shows
the Channel Guard channel (9), and then
the selected channel (5).
4. Press the [#] key to display the Channel
Guard channel briefly. The display shows
the group number, followed by the
Channel Guard channel, and then the
selected channel.
5. Press the [0] key
to reset all values to the
original programming, or press different
number keys (1–16) to select a different
set of Channel Guard values.
NOTE: During Scan or Priority Scan, the
receiver does not use the user-
selected Channel Guard values.
However, user-selected Channel
Guard values are used by the
transmitter in Scan Mode.
OTHER OPERATIONAL FEATURES
The BK Radio D Series is based on a microprocessor core that allows
extra features and operational characteristics to be programmed into
the radio. Your dealer can help define the best operational settings for
your system and program them into the radio.
SCAN DELAY
Scan delay lets the radio receive a response
to a transmission before scanning the other
channels for activity. If you find that your
scanner is restarting before message replies
CG
L
A
BE
L
9
Copy Channel Guard
Values from
Channel 9
1 2 3
4 5 6
7 8 9
0
*
#
CLR
FCN
PRI
ENT