User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 100 -
KNG Mobile Operation
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR EDIT
Zone Label
Zone 1 Label
Zone Label
Select "CLEAR" to reset the label. Use
the microphone keypad to enter a new
alphanumeric label.
To edit individual digits select "EDIT". Use
"PREV" and "NEXT" to highlight the digit to
change.
Select "ENTER" to set the label and return
to the previous step.
Zone Priority 1 Channel
A priority channel can be assigned on a
zone basis. If allowed, a system priority
channel will be monitored during priority
scan regardless of the selected zone
settings. (See "System Priority Channel")
When set to "O", Priority 1 is ignored.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Zone 1 P1 Channel
Off
Use Main
Select: Chan: 1