User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 101 -
KNG Mobile Operation
When set to "Use Main", the channel
selected by the channel knob is the Priority
1 channel.
Choose "Select" to designate a specic
channel as the Priority 1 channel.
Use "PREV" and "NEXT" to highlight the
desired Priority channel.
Press "ENTER" to nalize the selection.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Tx on Priority 1
Off
On
Transmit on Priority 1
If Transmit on Priority 1 is "On" the radio
will transmit on the programmed Priority 1
channel whenever priority scan is turned on
and that zone is active.
Use "PREV" and "NEXT" to highlight the
desired Operation.
Press "ENTER" to nalize the selection.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Zone 1 P1 Channel
1: Channel 1 Label
2: Channel 2 Label
3: Channel 3 Label