User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 62 -
KNG Mobile Operation
Keyset Picklist [KSET]
Digital or Mixed Mode Channels
OTAR equipped radios only. Requires option KZA0580 or KAA0580.
Selecting a Keyset from the Pick List will cause the radio to use encryption keys from
the selected Keyset.
(See Encryption Operation)
Emergency Signaling
If programmed, the Orange button on the front panel is used to send an emergency
call and/or emergency alarm on the programmed Emergency channel. If the
emergency channel is assigned for digital operation, the emergency signal is
broadcast using digital P25 protocol. If the assigned channel is analog, the
emergency signal is broadcast using MDC protocol.
Sending an Emergency Call
Press and hold the button to initiate an Emergency Call mode. The radio will emit
a series of beeps and "EMERGENCY" will ash on the display. The emergency
transmission is not sent automatically.
Once Emergency Call is initiated, the PTT must be pressed to transmit the
emergency message. Audio is also transmitted.