User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 78 -
KNG Mobile Operation
Global Positioning [GPS]
Conventional Digital Channels.
Requires GPS Option KZA0589 or KAA0589.
To access GPS functions press the "GPS" button or select "GPS" form the menu.
Viewing GPS information
To view current coordinates open the GPS menu and select "GPS Information".
After acquisition, the current location is displayed in degrees, minutes and
seconds.
Sending GPS information
Depending on radio programming, GPS information is sent by a variety of triggers.
PTT - After a digital transmission the GPS coordinates will be automatically
transmitted.
Periodic - GPS coordinates are transmitted periodically using a programmed
time.
Emergency - GPS coordinates are sent if the radio activates emergency.
Power on/o - GPS coordinates are sent once the radio powers up and
acquires a position and also on power o.
User Request - To send GPS information, open the GPS menu and select
"Transmit Request". From the Request menu select the desired target ID and
press "Enter".