User's Manual

- 30 -
KNG Mobile Operation
Scanning Code Guarded Channels
When a signal is detected, scanning stops while the radio checks for the proper Code
Guard value. If the signal contains the proper Code Guard value, the radio receives
the message. Otherwise, the radio resumes scanning immediately.
Transmitting with Scan On
The radio transmits on the channel selected by the Channel Selector knob unless
Talkback Scan is enabled or “Transmit on Priority 1” is enabled (see Priority Scan).
Talkback Scan
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
MON SCAN SCN+
MENU
Channel 16
Secure One
155.645 MHz
R
C
If your radio is programmed for Talkback
Scan, press PTT while a channel is active or
while scan delay time remains, you will be
responding on the transmit frequency of the
received channel. The 'RX' indicator will be
shown in the display while scan delay time
remains.
Talkback Scan will not work if Priority Scan
is on and your radio is also programmed to
transmit on the Priority 1 channel.
Index