User's Manual

- 70 -
KNG Mobile Operation
Keypad Programming
Keypad programming consists of four sections: Global, System, Zone and Channel.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
1: Global
2: System
3: Zone
4: Channel
Global parameters apply to settings that
effect all systems, zones and channels.
System parameters, such as scan hold time,
effect all conventional zones.
Zone parameters pertain to settings in a
select zone of channels.
Channel parameters include channel specic
information such as frequencies, tones,
operational modes, etc.
Programming Global Parameters
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR
EDIT
000000
User Password
User Password
The User Password is used only for entering
the keypad programming mode. The
Administrator and Startup Passwords cannot
be changed via the keypad.
Select "CLEAR" to reset the password to all
zeros. Use the microphone keypad to enter
a new six-digit password.
Index