User's Manual

KNG2 Portable Radio User’s Manual
- 31 -
Unit-to-Unit Call Options
Individual Unit Call [UNIT]
Conventional Digital and Trunking Channels
P25 Unit IDs allow for Unit-To-Unit calls when the radio is operating in
Digital Mode. The function must be enabled by radio programming to
allow this mode of operation.
Channels programmed for analog only operation will not be able to
transmit or receive Unit-To-Unit calls.
Conventional Channels
Placing an Individual Unit Call
Open the Unit Call menu and select the desired “Unit Call” option.
Last Call = Use the P25 ID of the last Call.
Call List = Use the programmed P25 ID List.
Enter ID = Enter a numeric P25 ID.
Press Enter to enter Unit Call Mode.
The LCD displays the ID number or associate label of the targeted
radio.
Press the PTT button to send the unit-to-unit call.
To exit the Individual Call mode press “Exit”.
If there is no response to the call after 60 seconds, the radio exits the
Unit-to-Unit mode and returns to normal operation.
Receiving an Individual Unit Call
When a properly addressed unit call is received, an alert tone sounds
and the LCD displays the ID number or associated label of the radio
placing the call.
Accept the call
To accept the call and respond in unit-to-unit mode, press “ACPT”
and transmit as normal.
To exit the Individual Call mode, press “Exit”.
Ignore the call
To ignore the call and continue operating in normal mode, press “INGR”.