User's Manual

24
KNG User’s Manual
25
RELM/BK Radio
If programmed to a button:
Rekey
Rekey Now?
ESC YES ENT
1. Press the button programmed for Rekey.
(RKY)
2. Press the 'YES' button to request a key
or press ESC to abort the operation.
3. Hold the 'ESC' button to return to normal
operation.
If programmed to the Menu button:
Channel Scan
Rekey
PRI Scan
ESC ▲ ▼ ENT
TXD
Rekey
Rekey Now?
ESC YES ENT
1. Press the Menu button.
2. Use the up/down buttons to highlight
"Rekey" selection.
3. Press the 'ENT' to open the menu.
4. Press the 'YES' button to request a key
or press 'ESC' to abort the operation.
5. Hold the 'ESC' button to return to normal
operation.
If a successful rekey occurs, an ascending tone will sound, and the
display will momentarily show "REKEYED".
If the rekey attempt fails, a descending tone will sound, and the display
will momentarily show "NO_REKEY".
If the selected channel has not been marked as an OTAR channel, the
radio will boop and "NON-OTAR" will appear on the display.
Keyset Viewing and Selecting
The radio can hold up to 8 encryption keysets. Only one keyset can
be active at any time. The radio will receive messages encrypted with
any of the keys in any of the keysets, but transmit keys can only be
selected from the active keyset.
Follow the steps below to view/select the Keyset.
If programmed to a button:
Keysets
→
Keyset 1
Keyset 2
ESC ▲ ▼ ENT
1. Press the button programmed for the
Keyset (UKST).
2. Use the up/down buttons to highlight the
desired keyset.
3. Press the 'ENT' button to select the
highlighted keyset.
4. Hold the 'ESC' button to return to normal
operation.
If programmed to the Menu button:
Keysets
→
Keyset 1
Keyset 2
ESC ▲ ▼ ENT
Channel Scan
Keysets
PRI Scan
ESC ▲ ▼ ENT
TXD
1. Press the Menu button.
2. Use the up/down buttons to highlight the
"Keysets" selection.
3. Press the 'ENT' button to open the keyset
menu.
4. Use the up/down buttons to highlight the
desired keyset.
5. Press the 'ENT' button to select the
keyset.
6. Hold the 'ESC' button to return to normal
operation.