User's Manual

28
KNG User’s Manual
29
RELM/BK Radio
Silent Mode (SLNT)
When SLNT is on, all audible indicators (button beeps etc.) are disabled.
Button Operation
On - Press the programmed button.
SLNT
Off - Press the button again. SLNT
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'Silent'.2.
Press the 'ENT' button.3.
Use the up/down buttons to select 'On' or 'Off'.4.
Press the 'ENT' button to set the selection.5.
Hold the 'ESC' button to return to normal operation.6.
Squelch Adjust (SQL)
Squelch adjust can be assigned to the keypad or a radio menu item.
Button Operation
Press the programmed button.1.
Use the up/down arrows to select the desired squelch point.2.
Press 'ENT' to set the selection. 3.
Hold the 'ESC' button to return to normal operation.4.
Menu Operation
Squelch Adjust
+ -
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
Talkaround
Tx Power
Squelch Set
ESC ▲ ▼ ENT
Press the Menu button.1.
Use the up/down buttons to select 2.
'Squelch Set'.
Press the 'ENT' button.3.
Use the up/down arrows to select the 4.
desires squelch point.
Press 'ENT' to set the selection. 5.
Hold the 'ESC' button to return to 6.
normal operation.
Tx Digital (TXD)
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
TXD
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
TXA
When the TXD is on, channels programmed
for mixed-mode transmit will transmit in digital
mode. When off, mixed-mode channels
transmit in analog mode. When transmitting
in digital mode the display shows 'D' behind
the TX indicator. In analog transmit 'A" will
follow the indicator.
Toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation
On - Press the programmed button.
TXD
Off - Press the button again. TXD
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'TX Digital'.2.
Press the 'ENT' button.3.
Use the up/down buttons to select 'Digital' or 'Analog'.4.
Press the 'ENT' button to set the selection.5.
Hold the 'ESC' button to return to normal operation.6.
Tx Power (LPW)
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
TXD
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
TXD
If Tx Power selection is enabled, transmit
power can be switched between the high
power and the pre-programmed low power
setting.
Toggle switch operation
High - Slide the programmed switch toward the front of the radio.
Low - Slide the switch up toward the channel select switch.