Instruction manual

16
APPENDIX 1
Audio Panel Connectors
MODULAR JACKS (1) ICS AUX AUDIO SUPERVISOR CLOCK
PIN COLOR J14 J15 (2) JI6 J20
1 WHT/ORG ICS AUDIO IN S-AUDIO OUT HI POS 1 AUDIO HI LOAD +
2 ORG/WHT ICS AUDIO COM S-AUDIO OUT COM POS 1 AUDIO COM LOAD -
3 WHT/GRN MIC AUDIO OUT PA AUDIO HI POS 2 AUDIO HI CLOCK +
4 BLU/WHT SIG 1 REC #6 LO POS 3 AUDIO COM DATA -
5 WHT/BLU SIG2 REC #6 HI POS 3 AUDIO HI DATA +
6 GRN/WHT MIC AUDIO COM PA AUDIO COM POS 2 AUDIO COM CLOCK -
7 WHT/BRN SIG 4 TV HI POS 4 AUDIO HI N.C.
8 BRN/WHT CALL TV COM POS 4 AUDIO COM GND
TRANSCEIVER OUTPUTS
CIRCULAR DIN PIN
J8 THRU J13
1 MIC AUDIO HI
2 MIC AUDIO COM
3 PTT
4 PTT COM
5 SPARE
6 GND
RECEIVE INPUTS
RCA PIN
J1 THRU J7
1 REC AUDIO HI
MICROPHONE AUDIO IN
CIRCULAR DIN PIN
J17 AND J18
1 WHITE MIC AUDIO HI
2 BROWN MIC AUDIO COM
3 RED PTT
4 BLACK PTT COM
5 GREEN HEADPHONE HI
6
LOCAL PTT
RCA
PIN J19
1 PTT
Note:
(1) Modular connector wiring conforms to standard EIA/TIA 568B.
In this convention, Tip is the white/color wire and Sleeve is the color/white wire.
(2) When J15 is used in a Supervisors Panel,
a Scanner is connected to pins 4 and 5 (Receive input 6) and pins 1 & 2 are not used.
Rev 4/12/06