Owner`s manual

RELM Communications, Inc. 15
predetermined channel while responding to or initiating a call while in the scan mode. When
pressing the
[PTT]
button, the radio stops scanning and transmits on the “revert” channel.
FREQUENCY REVERSE／TALK AROUND
Your dealer can program the “Frequency Reverse” or “Talk Around” feature. If communications
between radios are disrupted because of a long distance from the repeater, frequency reverse
feature can be used to re-establish communications to another radio. When the “frequency
reverse” feature is enabled, the transmit frequency and receive frequency will be reversed. At the
same time, the corresponding CTCSS/CDCSS encode and decode tones will also be reversed. To
enable or disable the “Frequency Reverse” feature, press the
[TA]
key.