Owner Manual

ManualsBrandsRELN ManualsCore PlumbingLinear Grid Shower Drain

WE MOVE WATER

relnproducts.com

RELN Bathroom Collection

1. It is important to plan the location of your shower drain with your plumber prior to setting pipe work, as the

waste pipe is located directly in the center of the grate. Set base of the drain in position. Apply a 1/4 inch

bead of 100% silicon caulk to adhere the pan liner to the drain base.

2. Apply waterprooﬁng pan liner, insert drain base clamping and tighten bolts. Place shower drain in desired

position. Ensure shower drain is level and at the required height, allowing for bedding screed, tile adhesive

and tile thickness.

3. Use the shower drain as a template to create a cavity in the desired position.

4. Ensure grate is protected from scratching during the installation process by wrapping in plastic or masking

tape. Apply bedding screed allowing for tile adhesive and tile thickness. Lay ﬂoor bed so it slopes towards

the shower drain. Once ﬂoor bed is dry apply tiles.

5. Shower drain should sit just below face of tile and then joint ﬁlled with neutral cure silicone to complete.

Important Note: It is recommended that you remove the grate for regular cleaning.

Warranty

RELN Bathroom Collection will replace any drain that is found to be defective due to substandard materials and/or workmanship within the warranty period by contacting the

store where you purchased your product. RELN will assess your claim based on the information provided. This warranty does not cover any installation or removal costs. The

beneﬁts given by this warranty are additional to other rights and remedies that you may have under laws relating to our products. You are entitled to a replacement or refund for

a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods replaced if the goods fail to be acceptable

quality and the failure does not amount to a major failure.

Installation Guide for Shower Drains

Silicone Edge

Threaded Adapter

Hair Strainer

Shower Drain

Drain Base

Bedding

Screed

Tiles

Tile Adhesive

Waterprooﬁng

Liner

Date of Issue:07/2020

20309 Reln Square Drain Instructions_2pp Flyer.indd 1 31/7/20 11:22 am

Summary of content (2 pages)

PAGE 1
W E M O V E WAT E R RELN Bathroom Collection Installation Guide for Shower Drains 1. It is important to plan the location of your shower drain with your plumber prior to setting pipe work, as the waste pipe is located directly in the center of the grate. Set base of the drain in position. Apply a 1/4 inch bead of 100% silicon caulk to adhere the pan liner to the drain base. 2. Apply waterproofing pan liner, insert drain base clamping and tighten bolts. Place shower drain in desired position.
PAGE 2
W E M O V E WAT E R TRADE APPROVED The RELN philosophy ‘We Move Water’ is so true about all our products, we take great pride in the performance of our Shower Drain Collection. RELN Shower Drain Drainage is more than just a way in which ‘We Move Water’ it is a visual design statement, our drainage collection are features within your bathroom. The RELN Shower Drain Collection takes plumbing to the next level of design and function.