User Manual

ENGLISH
39
6. Carry out the rmware update by clicking the start button.
7. The new rmware will now be assigned to the device.
8. If the update is successful,the Power Status LEDs -T30- and MIDI Status LEDs -T31- will ash si-
multaneously. If the update failed the Status LEDs will start ashing alternatingly.
9. After having carried out the update successfully close the frimware update tool and restart Mixa-
ge via the On/Off Button -B41-.
10. After a successful update you can re-check the rmware. Please refer to item 6.1 „Firmware
Check“ under 6. „Updates & Support“.