User Manual

ENGLISH
46
Element Funktion Funktion bei aktivem Shift -T3-
T31 Gain Dial
With this dial it is possible to adjust the deck‘s
volume.
T32 EQ Dial High
Via this dial the high frequencies can be adjus-
ted.
T33 EQ Dial Mid
Via this dial the middle frequencies can be
adjusted.
T34 EQ Dial Low
Via this dial the low frequencies can be adjus-
ted.
T35 Cue Monitor
Via this button it is possible to monitor the
selected deck.
Preview Player Buttons
Via these buttons the selected
track will be assigned to the
Preview Player and the track will
start and stop respectively.
T36 Linefader
Via the linefader the channel‘s volume can be
adjusted.
T37 Master Volume
Via this dial the master volume can be adjus-
ted.
This dial is analog and does not send a MIDI
signal.
T38 Booth Volume
Via this dial the booth output volume can be
adjusted.
This dial is analog and does not send a MIDI
signal.
T39 Headphones Volume
Via this dial the headphones‘ volume can be
adjusted.
This dial is analog and does not send a MIDI
signal.
T40 Cue Mix Fading
Via the Cue Mix dial a pre-mix can be simula-
ted via the headphones. In right position the
master signal is audible, in left position the cue
signal is audible.
T41 Power LED
The Power LED shows that the Jockey 3 dispo-
ses of a sufcient power supply.
T42 MIDI Status LED
The MIDI Status LED shows that MIDI com-
mands are being sent by the controller.
T43 VU Meter
The VU Meter shows the selected decks‘ input
level.
T44 Crossfader
Via this fader it is possible to fade between the
decks. Please also see -T21-.
F48 Crossfader Curve
Herewith it is possible to adjust the
crossfader‘s curve. Long > Cut.