Operation Manual

NOTE!

In order to adjust the bars beforehand hold the shift button -23 H- and push

the beat tact button -25 H-.

3.9.3. Sample function

You can also save a created loop to two sample banks. After having created a

loop push the “Save To” button -26 H / S- and select sample bank 1 or 2 -27 H /

S-. The loop has now been saved to the respective sample bank.

NOTE!

Depending on whether a cue point or loop has been set the sample bank can

be used as hot key or loop memory.

In order to play the sample parallel to the music enable the sampler mode via the

sampler button -37 S- or by pushing the sample encoder -28 H-. It is now possible

to call up the sample by clicking the respective sample bank -27 H / S-. Via the

sample encoders -28 H- it is possible to adjust volume on the left and he sample

length on the right side.

NOTE!

This is only available in sampler mode.

Depending on the last played sample bank the volume/length encoders are

assigned. In order to stop a sample disable the sampler mode by pushing the

sampler encoder -28 H- or the sample button -37 S-.

4. PREFERENCES

• Audio System Setting

ENGLISH

P II

P III

P IV

P V

P I P VI