Bedienungsanleitung ACHTUNG! Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die mit der Aufstellung, Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen entsprechend qualifiziert sein und diese Betriebsanleitung genau beachten.
ACHTUNG! Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die mit der Aufstellung , Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen entsprechend qualifiziert sein und diese Betriebsanleitung genau beachten.
- Stellen Sie keine Flüssigkeitsbehälter, die leicht umfallen können, auf dem Gerät oder in dessen Nähe ab. Falls doch einmal Flüssigkeit in das Geräteinnere gelangen sollte, sofort den Netzstecker ziehen. Lassen Sie das Gerät von einem qualifizierten Servicetechniker prüfen, bevor es erneut genutzt wird. Beschädigungen, die durch Flüssigkeiten im Gerät hervorgerufen wurden, sind von der Gewährleistung ausgeschlossen.
1. Bezeichnungen B13 B14 B15 B16 B21 B20 B12 B17 B22 B31 B32 B23 B27 B24 B26 B30 B25 B28 B29 B10 B18 B33 B19 B11 B8 B9 B7 B6 DEUTSCH B4 4 B3 B1. B2. B3. B4. B5. B6. B7. B8. B9. B10. B11. B12. B13. B14. B15. B16. B17. B18. B19. B20. B21. B22. B23. B24. B25. B26. B27. B28. B29. B30. B31. B32. B33. B34.
Bezeichnungen nur für die Master Edition B35 B35. B36. B37. B38. B39. B40. B49.
2. Erste Schritte / ASIO Treiber Installation Legen Sie die mitgelieferte Installions-CD in Ihr Laufwerk. Im Ordner ASIO-Drivers wählen Sie den für Ihr System passenden Treiber aus und installieren diesen. 1. Sie kommen ins Sprachen-Auswahlfenster DEUTSCH 2. Nachdem Sie Ihre Sprache gewählt haben, werden Ihnen die Installations-Optionen angezeigt. Wählen Sie „Install the driver“. 3. Sie werden nun aufgefordert den Reloop Digital Jockey 2 – Master Edition mit Ihrem System zu verbinden.
3. Traktor LE Software-Installation Führen Sie im Ordner Traktor die für Ihr System passende Setup-Datei aus. Installieren Sie Traktor LE manuell. Hinweis für Mac User: Führen Sie die Traktor LE Installationsdatei auf der CD manuell aus. Upgrade auf Traktor PRO: Mit Ihrer beiliegenden Traktor LE Version haben Sie den Vorteil, die umfangreiche Traktor PRO Version zum Vorzugspreis zu erwerben. Aktuelle Preiskonditionen erfahren Sie auf www.nativeinstruments.de 4.
5. Bedienung Nachdem Sie den Controller angeschlossen und die Software installiert haben, können Sie nun Traktor mit dem Digital Jockey 2 Master Edition bedienen. Die Digital Jockey Bedienoberfläche für Traktor PRO unterscheidet sich größtenteils zu Traktor LE in der Effekt- und 4-Deck-Steuerung. Bitte beachten Sie hier auch die Bedienoberfläche Traktor LE. Ihr Digital Jockey ist für Traktor PRO sehr umfangreich ausgelegt. Im Folgenden wird die volle Traktor Funktionsbelegung beschrieben.
B14. Cue-Taste Hiermit wird die Vorhörfunktion für das jeweilige Deck aktiviert. Shift: Preview-Funktion. Mit dieser Taste können Sie einen Track aus dem Browser vorhören, ohne das Lied in den Player laden zu müssen. B15. Shift-Taste Mit dieser Taste können Sie eine zweite Funktion eines Controller-Elements aufrufen. Auf der Controller-Oberfläche sind alle Shift-Funktionen in weiß hinterlegt. B16. Gain-Regler Mit dem Gain-Regler können Sie die Lautstärke eines Tracks anpassen. B17.
B25. Loop Active-Anzeige Die Loop Active-Taste leuchtet auf, wenn ein Loop aktiv ist. Shift: FX Select (Advanced Mode). Im Advanced Effect-Modus kann mit dieser Taste durch die Effekte gewechselt werden. [Traktor PRO] B26. FX/Value 1-3 Encoder [Traktor PRO] Je nach eingestelltem Effekt können mit diesen Reglern die Parameter 1-3 eingestellt werden. Shift: FX Select 1-3 im Chained Effekt-Modus können mit den Encodern die Effekte für die Bänke 1-3 gewählt werden. [Traktor PRO] B27.
B42. Netzteilanschluss An diese Buchse können Sie das Netzteil des Digital Jockey 2 Master Edition anschließen. B43. Ein/Aus-Schalter Mit diesem Schalter lässt sich Ihr Digital Jockey ein- bzw. ausschalten. B44. USB-Anschluss Schließen Sie hier Ihr USB-Kabel an. B45. Audio-Ausgang (Master1) Verbinden Sie hier Ihre Haupt-Soundanlage asymmetrisch mit einem Cinch-Kabel oder symmetrisch mit einem 6,3 mm Klinkekabel. B46. Audio-Eingang Sie können eine externe Soundquelle (z.B.
6. Stand Alone-/Software Betrieb Ihr Reloop Digtal Jockey 2 – Master Edition ist mehr als ein MIDI-Controller mit einem professionellen 24-Bit/96 kHz Audiointerface. Sie haben die Möglichkeit ihn, völlig unabhängig von der Verwendung einer Software, als analogen Stand-Alone Mixer zu nutzen. Beispiel 1 : Stand Alone-Betrieb Sie schließen einen CD-Player auf der Rückseite Ihres Digital Jockeys, an den Audio-Eingang Input1 und einen Plattenspieler an den Audio-Eingang Input2 -B46- an.
7.
DEUTSCH RECHTES DECK Button MIDI Command (Pushed) MIDI Command (Release) SYNC 09 90 3D 7F 09 90 3D 00 KEYLOCK 09 90 3E 7F 09 90 3E 00 PITCH BEND- 09 90 3F 7F 09 90 3F 00 PITCH BEND+ 09 90 40 7F 09 90 40 00 PREVIEW 09 90 41 7F 09 90 41 00 FX_SEL2 09 90 42 7F 09 90 42 00 ACTIVE2 09 90 43 7F 09 90 43 00 LOOP_ADJ 09 90 44 7F 09 90 44 00 FX_ON 09 90 45 7F 09 90 45 00 SHIFT 09 90 46 7F 09 90 46 00 FX_SEL1 09 90 47 7F 09 90 47 00 ACTIVE1 09 90 48 7F 09 90 48 00 FX_SEL3 09 9
8. Technische Daten Folgende Daten des Herstellers werden von der Global Distribution GmbH nicht auf Plausibilität und Richtigkeit geprüft: Stromversorgung:........................................................................DC6V, 3A Maße: . ...........................................................................................370 x 61 x 307 mm Gewicht:.........................................................................................
9. Minimale Systemanforderungen PC: - Windows XP (Service Pack 2), Vista (32-Bit) - Pentium III, 1 GHz oder Athlon XP 1,4 GHz - 512 MB RAM Mac: - Mac OS 10.4 - G4 1,5 GHz oder Intel Core Duo Familie - 512 MB RAM 10. Support & Download DEUTSCH Prüfen Sie regelmäßig die Seiten www.digital-jockey.dj und www.reloopdj.com/forum, um Firmware Updates oder neue Mappings herunterladen zu können. Auch Video Tutorials und Support stehen Ihnen hier zur Verfügung.
DEUTSCH 17
CAUTION! For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, maintenance and service of this device must be appropriately qualified and observe this operation manual in detail. This product complies with the requirements of the applicable European and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer. Index - Safety Instructions...
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents. Always ensure sufficient ventilation. - The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may destroy your device.
1. Designations B13 B14 B15 B16 B21 B20 B12 B17 B22 B31 B32 B23 B27 B24 B26 B30 B25 B28 B29 B10 B18 B33 B19 B11 B8 B9 B7 B6 ENGLISH B4 20 B3 B1. B2. B3. B4. B5. B6. B7. B8. B9. B10. B11. B12. B13. B14. B15. B16. B17. B18. B19. B20. B21. B22. B23. B24. B25. B26. B27. B28. B29. B30. B31. B32. B33. B34.
Designations only for the Master Edition B35 B35. B36. B37. B38. B39. B40. B49. B36 B37 B49 B49 B40 B39 6.3 mm Microphone Connection Mic Volume Knob Mic Equalizer 3.5 mm & 6.3 mm Headphones Connection Headphones Equalizer Crossfader Curve MIDI/Phono/Line Switch B55 B41 B42 B45 B44 B45 B43 B56 B55 B46 B47 B46 B48 B47 Mains Cord Strain Relief Mains Connection On/Off Button USB Port Audio Output asymmetrical RCA or symmetrical 6.
2. Firtst Steps / ASIO Driver Installation Please insert the enclosed installation CD in your drive. In the ASIO drivers file select the driver corresponding to your system and install it. 1. The language-selection window will open. ENGLISH 2. After having selected your language the installation options will be displayed. Select „Install the driver“. 3. Now you will be asked to connect the Digital Jockey 2 Master Edition to your system.
3. Traktor LE Software Installation In the Traktor folder carry out the setup file corresponding to your system. Install Traktor LE manually. Note for Mac users: Please manually execute the Traktor LE installation fi le on the provided installation disc. Upgrade for Traktor PRO: With the provided Traktor LE version you have the benefit of purchasing the extensive Traktor Pro version at a preferential price. Current conditions regarding the prices can be found on www.nativeinstruments.com. 4.
5. Operation After the controller has been connected and the software has been installed you can control Traktor with the Digital Jockey 2 Master Edition. Compared to Traktor LE the Digital Jockey user interface for Traktor Pro mainly differs in the effect and 4 deck operation. Please also see the user interface for Traktor LE. Your Digital Jockey has been optimized extensively for Traktor PRO. Below, Traktor‘s full function assignment will be described.
B14. Cue Button Via this button the monitoring function for the respective deck will be activated. Shift: Preview function. With this button you can monitor a track from the browser without having to load it to the player. B15. Shift Button With this button it is possible to access a contoller element‘s second function. On the controller‘s surface all shift functions are displayed in white captions. B16. Gain Knob With the gain knob you can adjust a track‘s volume. B17.
B25. Loop Active Display If a loop is active this button will be illuminated. Shift: FX Select (Advanced Mode). In Advanced Effect mode you can switch through the effects by using this button. [Traktor PRO] B26. FX/Value 1-3 Encoder [Traktor PRO] Depending on the selected effect it is possible to adjust the parameters 1-3 with this controller. Shift: FX Select 1-3. In Chained Effect mode you can select the effects for banks 1-3 with the encoders. [Traktor PRO] B27.
B42. Mains Connection You can connect the Digital Jockey 2 Master Edition‘s mains adapter to this connection. B43. On/Off Button With this button ou can turn the Digital Jockey on and off respectively. B44. USB Port Connect your USB cord to this input. B45. Audio Output (Master 1) Connect your main sound system via RCA cord (asymmetrical) or 6.3 mm jack (symmetrical) to this output. B46. Audio Input An external sound source (e.g. CD player, turntable) can be connected to this input. B47.
6. Stand Alone / Software Operation Your Reloop Digital Jockey 2 – Master Edition is more than just a MIDI controller with integrated 24 bit/96 kHz audio interface. It is possible to use it as analogue stand alone mixer, completely independent from a software. Example 1: Stand Alone Operation Connect a CD player to the Audio Input 1 or a turntable to the Audio Input 2 -B46- on the rear side of the Digital Jockey. Make sure to connect your turntable‘s grounding cord to the GND Grounding Screw -B55-.
7.
ENGLISH right DECK Button MIDI Command (Pushed) MIDI Command (Release) SYNC 09 90 3D 7F 09 90 3D 00 KEYLOCK 09 90 3E 7F 09 90 3E 00 PITCH BEND- 09 90 3F 7F 09 90 3F 00 PITCH BEND+ 09 90 40 7F 09 90 40 00 PREVIEW 09 90 41 7F 09 90 41 00 FX_SEL2 09 90 42 7F 09 90 42 00 ACTIVE2 09 90 43 7F 09 90 43 00 LOOP_ADJ 09 90 44 7F 09 90 44 00 FX_ON 09 90 45 7F 09 90 45 00 SHIFT 09 90 46 7F 09 90 46 00 FX_SEL1 09 90 47 7F 09 90 47 00 ACTIVE1 09 90 48 7F 09 90 48 00 FX_SEL3 09 90
8. Technical Specifications Global Distribution GmbH did not check the following manufacturer‘s data for plausibility and accuracy: Power Source................................................................ DC6V, 3A Dimensions..................................................................... 370 x 61 x 307 mm Weight............................................................................. 2.9 kg (without USB and RCA cords) Input/Output Impedance & Sensitivity.....................
9. Minimum System Requirements PC: - Windows XP (Service Pack 2), Vista (32 bit) - Pentium III, 1 GHz or Athlon XP 1.4 GHz - 512 MB RAM Mac: - Mac OS 10.4 - G4 1.5 GHz or Intel Core Duo Family - 512 MB RAM 10. Support & Download ENGLISH Please go regularly to www.digital-jockey.dj and www.reloopdj.com/forum in order to download new firmaware updates or new mappings. Video tutorials and support are also at your disposal.
ENGLISH 33
ATTENTION! Pour votre propre sécurité, veuillez lire attentivement ce mode d‘emploi avant la première utilisation ! Toutes les personnes chargées de l‘installation, de la mise en service, de l‘utilisation, de l‘entretien et la maintenance de cet appareil doivent posséder les qualifications nécessaires et respecter les instructions de ce mode d‘emploi.
- Ne placez jamais des récipients de liquides susceptibles de se renverser sur l’appareil ou à proximité directe. En cas d’infiltration de liquides dans le boîtier, retirez immédiatement la fiche électrique. Faites contrôler l’appareil par un technicien qualifié avant de le réutiliser. La garantie exclu tous les dégâts dus aux infiltrations de liquides. - N’utilisez pas l’appareil dans un environnement extrêmement chaud (plus de 35°C) ou froid (sous 5° C).
1. Descriptions B13 B14 B15 B16 B21 B20 B12 B17 B22 B31 B32 B23 B27 B24 B26 B30 B25 B28 B29 B10 B18 B33 B19 B11 B8 B9 B7 B6 FRANCAIS B4 36 B3 B1. B2. B3. B4. B5. B6. B7. B8. B9. B10. B11. B12. B13. B14. B15. B16. B17. B18. B19. B20. B21. B22. B23. B24. B25. B26. B27. B28. B29. B30. B31. B32. B33. B34.
Descriptions uniquement pour Master Edition: B35 B35. B36. B37. B38. B39. B40. B49.
2. Premiers pas/installation du pilote ASIO Insérer le cédérom d‘installation livré dans votre lecteur. Sélectionner le pilote adapté à votre système dans le répertoire ASIO-Drivers et l‘installer. 1. Vous accédez à l‘écran de sélection des langues. FRANCAIS 2. Après la sélection de votre langue, les options d‘installation sont affichées. Sélectionner „Install the driver“. 3. Vous devez ensuite connecter le Reloop Digital Jockey 2 – Master Edition avec votre système.
3. Configuration du logiciel Traktor LE Exécuter le fichier approprié dans le fichier Traktor. Installer Traktor LE manuellement. Note pour utilisateurs Mac: Exécuter manuellement le fichier d‘installation contenu sur le disque d‘installation ci-joint. Mise à niveau Traktor Pro Votre présente version Traktor LE offre l‘avantage de pouvoir acheter la version Traktor PRO complète à un prix préférentiel. Vous pouvez consulter les prix sur le site www.native-instruments.de. 4.
5. Utilisation Lorsque le contrôleur est connecté et le logiciel installé, vous pouvez contrôler Traktor avec votre console Digital Jockey 2 Master Edition. L‘interface de commande Digital Jockey 2 pour Traktor PRO diffère principalement de celle de Traktor LE dans la commande des effets et les 4 platines. Veuillez également respecter les instructions relatives à l‘interface de commande Traktor LE. Votre console Digital Jockey 2 dispose d‘un équipement complet pour Traktor PRO.
B15. Touche Shift Cette touche permet d‘activer la deuxième fonction d‘un élément du contrôleur. Toutes les fonctions Shift sont affichées sur fond blanc sur l‘interface du contrôleur. B16. Régleur de Gain Le régleur de Gain sert à ajuster le volume d‘une piste. B17. Régleur High Ce régleur sert à ajuster les aigus. Pression sur le régleur High : fonction High Kill. Enfoncer le régleur High pour filtrer les aigus. Shift: Fonction Filter. Enfoncer la touche Shift pour moduler un filtre.
B27. Touches Activate 1 - 2 Ces touches permettent, selon l‘effet sélectionné, d‘activer les paramètres 1 ou 2. B28. Touche Activate 3 [Traktor PRO] Sert à activer le paramètre 3 en fonction de l‘effet sélectionné. Shift: FX 1. Sert à affecter le banc d‘effet du côté A du lecteur et à l‘activer.[Traktor PRO] B29. FX On Advanced Mode En mode Advanced Effect, cette touche sert à activer l‘effet. Shift: FX 2. Sert à affecter le banc d‘effet du côté B du lecteur et à l‘activer. [Traktor PRO] B30.
B46. Entrée Audio Cette fiche d‘entrée sert à raccorder une source audio externe (par ex. lecteur de CD, platine vinyle). B47. Sélecteur Phono/Line En fonction de la source audio raccordée, vous pouvez ici activer ou désactiver le préampli Phono. B48. Phono/Line Routing Switch Cet interrupteur vous permet de déterminer si l‘entrée Phono/Line -B46- est directement dirigée par la section console de mixage du Digital Jockey vers la sortie Master ou vers le logiciel.
6. Fonctionnement Stand Alone/logiciel Votre Reloop Digital Jockey 2 – Master Edition est bien plus qu‘un contrôleur MIDI avec une interface audio professionnelle 24 bits/96 kHz. Vous pouvez vous en service en tant que console analogique Stand-Alone de manière totalement indépendante de l‘utilisation d‘un logiciel. Exemple 1 : Fonctionnement Stand Alone Raccorder un lecteur de CD sur la face arrière de votre Digital Jockey, à l‘entrée audio- Input1 et une platine vinyle à l‘entrée audio Input2 -B46-.
7.
FRANCAIS right DECK Button MIDI Command (Pushed) MIDI Command (Release) SYNC 09 90 3D 7F 09 90 3D 00 KEYLOCK 09 90 3E 7F 09 90 3E 00 PITCH BEND- 09 90 3F 7F 09 90 3F 00 PITCH BEND+ 09 90 40 7F 09 90 40 00 PREVIEW 09 90 41 7F 09 90 41 00 FX_SEL2 09 90 42 7F 09 90 42 00 ACTIVE2 09 90 43 7F 09 90 43 00 LOOP_ADJ 09 90 44 7F 09 90 44 00 FX_ON 09 90 45 7F 09 90 45 00 SHIFT 09 90 46 7F 09 90 46 00 FX_SEL1 09 90 47 7F 09 90 47 00 ACTIVE1 09 90 48 7F 09 90 48 00 FX_SEL3 09 90
8. Caractéristiques La plausibilité et l’exactitude des données suivantes du fabricant ne sont pas contrôlées par la société Global Distibution GmbH : Alimentation électrique:........................................................ D C6V, 3A Dimensions:.............................................................................. 370 x 61 x 307 mm Poids:.........................................................................................
9. Configuration hardware minimum: PC: - Windows XP (Service Pack 2), Vista (32 bits) - Pentium III, 1 GHz ou Athlon XP 1,4 GHz - RAM 512 MO Mac: - Mac OS 10.4 - G4 1,5 GHz ou Intel Core Duo - RAM 512 MO 10. Support & Download FRANCAIS Visiter régulièrement les sites www.digital-jockey.dj et www.reloopdj.com/forum pour télécharger les mises à jour du micrologiciel et les nouveaux mappages. Des démonstrations vidéo ainsi qu‘une assistance technique sont également disponibles.
FRANCAIS 49
NOTES ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ______________________________________________
NOTES ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ ______________________________________________
Reloop Distribution Global Distribution GmbH, Schuckertstrasse 28, 48153 Münster / Germany Fax: +49.251.