Operation Manual




If Traktor LE is used for the rst time the „Setup Wizard“ should start. If this is not the case please
click on „Help“ and select the menu item „Start Setup Wizard“. In the setup wizard select the
following items:
1. Answer the rst question „Are you using a USB/FireWire Controller?“ with „Yes“. Then click on
„Next“.
2. In the eld „Choose your manufacturer“ select the item „Reloop“. The following menu item
„Choose your model“ has to be answered with „Mixage“. Again conrm this selection with „Yes“.
3. The following question regarding connected hardware by manufacturer „Native Instruments“
has to be answered with „No“.
Your Reloop Mixage should now be congured accordingly for Traktor LE.

In order to be able to use Traktor with your setup combined with Mixage, please observe the fol-
lowing items in detail.

1. In Traktor open the setup dialogue by clicking the small cog wheel in the upper right corner.
2. Open the catagory „Audio Setup“ and in the led „Audio Device“ select the item „Reloop ASIO
(ASIO)“.
3. Open the category „Output Routing“ and in the eld „Mixing Mode“ select the button „Inter-
nal“. For channel assignment please see the following example.