Operation Manual




Indicates if the Auto BPM Counter (display reads „Auto BPM“) or manual BPM Counter (display
reads „BPM“ only) is activated.

Indicates the current BPM value of the track.

Indicates the name of the folder, le, album, genre, artist and title while playing an MP3 CD with
ID3 TAG or an audio CD with CD text. To change between the name of a folder, artist and title of an
MP3-CD, press the Track Wheel -4-. This information display animates a virtual disc which shows the
direction in which the CD turns and if the Jog Wheel has been touched while in Scratch mode. While
in the pre-set menu, the necessary settings are made in the Dot Matrix Information Display.

Indicates if the player is in Cue mode (the display reads „Cue“).

Indicates if the player is in Pause mode (the display reads „||“).

Indicates if the player is in Forward or Reverse mode.

Indicates if an audio CD (the display reads „CD“) or an MP3-CD (the display reads „MP3“) is playing.

Indicates if Auto-Cue is activated (the display reads „Auto Cue“). To de-/activate Auto-Cue press
and hold the Single/Continue button -8- for two seconds.

Indicates if the player is in Single mode (the display reads „Single“) or in Continue mode (nothing
on display).

Indicates if the player has stored a loop which can be prompted with the Reloop button -14- (the
display reads „Reloop“). When „Reloop“ ashes, the loop is active.

Activate the Loop In Button -12- to set the start point of a loop (endless loop) and also to set a
current Cue Point. In order to newly set the Loop-In point push the Loop In Button while the loop is
activated.

Activate the Loop Out Button -13- to set the end point of a loop (endless loop). If the Loop In Button
was previously activated, the player goes into the Loop mode (seamless loop) - the display reads
„Reloop“. To exit the loop, press the Loop Out Button again.
>>For more information about loops go to the chapter entitled „Sampling“.
In order to newly set the Loop Out point push and hold the Loop Out Button for approximately 2
seconds. Now you can shorten and lengthen the Loop Out point by turning the Jog Wheel.

Press the Reloop Button -14- for the player to return to the last loop that was played. To exit the
loop, press the Loop Out Button again.
>>For more information about loops go to the chapter entitled „Sampling“.

When in Play mode, the Cue/Sample Banks 1 to 4 -15- can be used as Hot Cue buttons. Once the
Sampler mode has been activated by using the Sampler Button -17- the player will play samples from
the banks simultaneously with the playback. For every bank, a 5-second sample can be saved and
played back. Press one of the respective Bank Buttons 1 to 4 to trigger the previously stored Cue
Points or samples.
>>For more information about loops go to the chapter entitled „Sampling“.