Operation Manual
In this menu it is possible to edit the single MIDI elements and parameters.
Please also refer to the MIDI Map in this manual.
In order to change a parameter hold the Shift Button -46- and adjust the desired value via the Track
Wheel -4-.
You would like to assign a different MIDI command to the Tap Button -38-. In the MIDI Map you can
see that Tap is assigned to the MIDI command 03. In the MIDI Notee Edit menu select position 03.
Now hold the Shift Button -46- and select the desired new MIDI value via the Track Wheel -4-.
With the menu item MIDI LED Edit it is possible to edit the LEDs‘ glowing via MIDI parameters. Please
refer to the MIDI Map in this manual. The editing of the single parameters follows the same procedu-
re as described in item E. Please refer to the example listed there.
With this adjustment it is possible to load the player‘s default settings. All player settings will be set
to default. Conrm the defaults via the Track Wheel -4-.
In order to save the adjusted parameters and leave the menu conrm the Exit & Save function via
the Track Wheel -4-.
It is possible to connect two RMP-3 players in order to play tracks from one USB source. On the in-
cluded CD you will nd a special program „Database Builder“. This program analyzes the USB data
carrier and creates special index les in order for the RMP-3 to access music les more easily and
quickly. Furthermore it is possible to interactively search for criteria such as title or artist (also refer
to the chapter „Submenu“, item 2. Playlist).
Operating system: Microsoft Windows XP (SP3), Vista (SP2)
CPU: Intel Pentium 4 1GHz processor or better,
Intel Centrino Mobile Technology 1.6 GHz
RAM: 512 MB RAM
Hard Disk: at least 100 MB free hard disk space required