Quickstart Guide Owner manual

ManualsBrandsReloop ManualsCD-playersRP-8000

ENGLISH

Your RP-8000 is an advanced high torque turntable with an industry

rst integrated performance pad section that is capable of controlling

MIDI software.

The RP-8000 is ready for Serato DJ and works

seamlessly plug ‘n‘ play (Ofcial Serato Accessory).

This Quick Start Guide will help you to set up, connect and control

your RP-8000 with Serato DJ (version 1.6.2 or higher).

Please make sure to download the latest version of Serato DJ at:

www.serato.com

LED CHECK MODE

Cue + push trax + power on

STAND BY SEQUENCE

Loop + push trax + power on

ALL MIDI SEND ON / OFF

Sample + push trax + power on

(determines whether all elements of the

turntable should send MIDI or not)

- Push Pad 1 to select (On/Off)

- Push Trax / Nav to save setting.

DUAL MODE ON / OFF

Sample + push trax + power on

- Push Pad 2 to select (On/Off)

- Push Trax / Nav to save setting.

FIRMWARE UPDATE MODE

Slicer (user) + trax + power on

FIRMWARE SETTINGS

PLAYER 1PLAYER 3 PLAYER 2

SLAVE 1MASTERSLAVE 2 SLAVE 3

PLAYER 4

SMART USB LINK

You can smartly link up to four RP-8000 in

series by using the USB link function.

In this way one turntable is connected directly

to the computer (Master / Player 1) and each

further turntable connected is automatically

set to the next channel in a chain

(Slave / Player 2,3,4).

Hint:

To manually select a MIDI channel (deck select)

on your turntable, you can hold down the

Navigation Trax Encoder at any time down for

approx. three seconds. The display will highlight

the active channel. Turn the encoder to select a

deck 1 – 4 or hit the pads 1-4 to set a channel.

Start the rmware update program on your

computer and follow the on-screen instructions

+ +

+ + / /

+ +

DEL ROLL STOP

DUAL

P1/P2

Summary of content (5 pages)

PAGE 1
Your RP-8000 is an advanced high torque turntable with an industry first integrated performance pad section that is capable of controlling MIDI software. SMART USB LINK You can smartly link up to four RP-8000 in series by using the USB link function. The RP-8000 is ready for Serato DJ and works seamlessly plug ‘n‘ play (Official Serato Accessory).
PAGE 2
1 CUE MODE - If a pad is not lit, push to set a cue point - Trigger a lit pad to launch a cue point - Hold CUE and push a pad to delete 2 LOOP MODE - Push a pad to set an auto loop from 1/32 to 32 (active range in Serato DJ) - Hold LOOP and press the drum pads to activate LOOP ROLL - Hold LOOP and turn the Trax / Nav Encoder for LOOP SHIFT 5 1 2 3 6 Ihr RP-8000 ist ein „Advanced High-Torque Turntable“, als erster seiner Art, mit integrierter Perfomance Pad Sektion zur Steuerung von MIDI-Software.
PAGE 3
Su RP-8000 es un „Advanced High-Torque Turntable“, el primero de su clase con una sección Performance PAD integrada para el control de software MIDI.
PAGE 4
Votre RP-8000 est la première platine de type „Advanced High-Torque Turntable“ équipée d‘une section de Performance Pad intégrée pour la commande de logiciel MIDI. 1 MODO CUE - Si un pulsador Pad no está iluminado, púlselo para definir un punto Cue - Pulse el Pad iluminado para activar un punto Cue - Puede eliminar un Pad si mantiene pulsado CUE y al mismo tiempo acciona el Pad correspondiente Grâce à la fonction USB Link, vous pouvez aisément raccorder jusque RP-8000.
PAGE 5
1 MODE CUE - Si un Pad n‘est pas éclairé, l‘enfoncer pour définir un point Cue - Enfoncer un Pad éclairé pour déclencher un point Cue - Vous pouvez effacer un Pad en enfonçant CUE et en actionnant simultanément le Pad respectif 2 MODE LOOP - Actionner un Pad pour définir une Auto Loop 1/32 – 32 (plage active de sélection dans Serato DJ). - Maintenir LOOP enfoncé et actionner simultanément un Drum Pad pour activer LOOP ROLL.