Operation Manual

ENGLISH

There are two types for the Needle View display:

• Waveform Scrolling

The waveform moves. A vertical line in the middle represents the needle.

• Tick Scrolling

The waveform remains still. The line (corresponds to the needle‘s position) moves.

NOTE!

This option is system-resource saving.

Select the corresponding option with a right mouse click in Needle View.

24. Master

Adjust the master volume for player 1 and player 2 respectively.

25. Mic Rec. Function

Due to the integrated Mic Rec. Function (Mic Spin!) you can record a sample via microphone that can

later be used for scratching for example.

Follow these steps:

Sample recording

• Under Audio Input (Music Explorer) assign the input “0: Reloop Spin! 2- Interface 1” via drag &

drop to one of the players

• Adjust the volume level via the mic volume knob

• Push the Rec button

• A save dialogue will appear; enter name and position where the sample should be stored

• After pushing “save” the recording will start; stop the recording by pushing the Rec. button once

Mic Spin! function (playing and scratching a sample)

• Via drag & drop assign a desired track from the Spin! Library or the recorded sample to a player

in order to manipulate it via record.

NOTE!

The mic input is coupled to the input 1. As soon as you connect the microphone the phono/line

input 1 is deactivated. If you would like to record a mic smaple during a mixing session make sure

that player 2 is currently playing. After recording disconnect the microphone in order to be able

to control player 1 via records.

26. Load Track

With this function it is possible to load single les to the player.