Operation Manual
ENGLISH
91
4.3.9 Loop
Here you can pre-dene up to 10 loops if required.
4.4 MIDI Learning
With the Free MIDI Learning Function you can assign MIDI commands to single software elements.
To do so activate the Free MIDI Learning Function by clicking the button in Shortcut View or under
File>Learning>Enable. Now choose an element by moving the mouse cursor over an element and wait
shortly. The corresponding element will be marked. Conrm the desired MIDI hardware controller in
order to assign it to the element. This way you can control the Spin! 2 software via MIDI keyboards
or DJ controllers.
Deactivate the button again in order to quit the MIDI Learning mode. It is possible to create, select
and edit MIDI presets in the MIDI control mode (> File > Options > MIDI Controller).