Manual

ENGLISH
Microphone Recordings:
- Connect your computer to the sPod PRO (9) via the included USB cable. Open your favoured audio software and select the
sPod PRO as input device (USB Multimedia Device)
- Switch the Input Select Switch (2) to MIC.
- Select the desired microphone level (1).
- Connect your headphones and select the desired output signal (7). Adjust the output volume (4).
- Start your recording.
AUX Recordings:
- Connect your computer to the sPod PRO (9) via the included USB cable. Open your favoured audio software and select the
sPod PRO as input device (USB Multimedia Device)
- Switch the Input Select Switch (2) to AUX IN.
- Select the desired AUX level (8).
- Connect your headphones and select the desired output signal (7). Adjust the output volume (4).
- Start your recording.
TIP:
If you put the select switch 7 to “Monitor”, the volume dial will be bypassed.
NOTE!
The headphones signal could become louder.
3. TECHNICAL SPECIFICATIONS
Voltage: DC, 5.0V
S/N Ratio: 59 dB
Sensitivity: -46 dB
Frequency Range: 50 Hz – 18 kHz
Weight: 485 g
Compatible with: WIN2000/XP/VISTA/7/MAC OSX
Subject to alterations.
Illustrations similar original product.
Misprints excepted.