User Manual

21
ENGLISH
5.2.10 BTH SRC (Booth Source)
With the help of this function an individual signal can be routed to the booth output.
5.2.11 AUX GAIN COMPENSATION
YoucanincreasetheAuxInput‘sinputlevelinordertoachievelouderplaybackofsourceswithaweakersignal(e.g.smartphones).
5.2.12 MIDI
The mixer is able to additionally send MIDI signals. The MIDI function can be turned on/off.
5.2.13 MIDI CH
TheMIDIchannelcanbesetfrom1–15.Channel16isreservedforexternalcontroloftheUSBOUTfunction.
5.2.14 MIDI TYPE
Determines the MIDI signal transmision mode TRIGGER or TOGGLE.
5.2.15 LED CHECK
All LEDs will be activated in order to check their functionality.
5.2.16 FACT RST (Factory Reset)
If you have adjusted a setting that cannot be reversed, you can select this item to bring all settings back to default.
5.2.17 FW UPDT (Firmware Update)
Inordertocarryoutarmwareupdate,connectyourRMX-90DVSviaUSB-56a-toacomputerandmakesurethatyourRMX-90DVSisturned
off via the ON/OFF Switch -58-. Hold down the line-fader start-button and crossfader start-button while powering on the device. Scroll to FW
UPDATEandconrmthisitembypressingtheTIMEENCODER.
Please regularly check www.reloop.comforRMX-90DVSrmwareupdates.Pleasemakesurethattheloadedrmwareiscompatiblewithyourdevice.
1. Download the corresponding update package from the Reloop RMX-90DVS product site and open it.
2. Open the program “ReloopFirmwareUpdate.jar”.
3.Selectthenewrmwarelebyclicking“OpenFile”
 andselectingtheincluded*.binle.
4. Click “Start >”. The update will start now.
5. After a successful update turn off the Reloop RMX-90DVS.
If you feel uncertain about this procedure, let your specialized dealer carry out
the update.
5.2.18 ABOUT
Showsthecurrentrmwareversion.
5.2.19 EXIT
The mixing console starts anew.
6. SERATO DJ DVS
The RMX-90DVS is a SeratoDJ and DVS enabled mixer and does not require further licenses for activation.
MakesurethatthemixerisconnectedviaUSB-56a-toyourcomputerandthatyourunthelatestSeratoDJversion(www.serato.com).
6.1 Driver Installation
The Reloop RMX-90DVS is a class compliant device for Mac OS X, but for Windows a driver is necessary. Please make sure that the driver instal-
lation is complete before using SeratoDJ.
Mac
No driver necessary.
Windows
Download the driver via our website: www.reloop.com
Doubleclickthe.exeletobegintheinstallationandfollowtheinstructionson
screen. Make sure to re-start the mixer after the installation.
6.2 Connections
Should you prefer turntables for DVS control, connect them to the phono inputs of
channels 2 and 3. If you use CD players, please connect them to the corresponding
LINE/CD Inputs.
Put the respective input switches -1- in the middle position (USB).
In SeratoDJ open the settings and go to the AUDIO tab. Depending on the connec-
ted devices, please select the corresponding DVS source in the software:
PHONO: turntables
CDJs: CD players
Custom: Depending on the settings in the USB OUT rmware menu, you can also use different DVS sources (PHONO & CDJs).
IM_RMX90-DVS_en.indd 21 21.12.2016 09:48:00