SDS

Safety Data Sheet
ReMARKable Water Based Dry-Erase - CLEAR – RESIN PART B
Revision date: 2018/07/24
!
4"|"Page!
!
!
!
!
!
!
Conditions for safe storage, including any incompatibilities
Keep in properly labeled containers. Keep containers tightly closed in a cool, well-ventilated place. Keep from freezing.
Storage Temperature: 15 – 25 C
Storage Area:
Protect from freezing. Store in a cool area. Keep out of direct sunlight. Store in a dry area. Store in a dark
area.
INCOMPATIBLE MATERIALS: Water reactives, Oxidizing agents
8. Exposure Controls/Personal Protection
Ammonia (7664-41-7)
US. ACGIH Threshold Limit Values
Time Weighted Average (TWA): 25 ppm
US. ACGIH Threshold Limit Values
Short Term Exposure Limit (STEL): 35 ppm
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Permissible exposure limit: 50 ppm, 35
mg/m3
US. ACGIH Threshold Limit Values
Time Weighted Average (TWA): 25 ppm
US. ACGIH Threshold Limit Values
Short Term Exposure Limit (STEL): 35 ppm
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Permissible exposure limit: 50 ppm, 35
mg/m3
Engineering Measures
Provide readily accessible eye wash stations and safety showers.
Provide natural ventilation
Personal protective equipment
Respiratory protection:
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should
be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations.
Respiratory protection must be provided in accordance with current local regulations.
Hand protection:
Chemical resistant protective gloves
Eye protection:
Tightly fitting safety goggles (chemical goggles). Wear face shield if splashing hazard exists
General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing
is required additionally to the stated personal protection equipment. Avoid inhalation of mists. Contact
with eyes and skin must be avoided.