SDS

Safety Data Sheet
ReMARKable Water Based Dry-Erase –Hardener Part A
Revision date: 2018/06/14
!
!
5"|"Page!
!
!
!
!
demand supplied-air respirator (SAR) with escape provisions.
Hand protection:
Chemical resistant protective gloves
Eye protection:
Tightly fitting safety goggles (chemical goggles). Wear face shield if splashing hazard exists
General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing
is required additionally to the stated personal protection equipment. Avoid inhalation of mists. Contact
with eyes and skin must be avoided.
Occupational Exposure limit(s)
1, 6 – hexamethylene diisocyanate
Time Weighted Average (TWA): ACGIH TLV
0.005 ppm
9. Physical and Chemical Properties
Form:
liquid
Odor:
Slight, fruity
Color:
Clear, Colorless to slight yellow
pH value:
N/A
Melting point:
No data available
Boiling point:
Decomposition
Flash point:
> 185 °C
Flammability:
Not flammable
Lower explosion limit:
Not applicable
Upper explosion limit: Not applicable
Auto ignition: 445 °C
Vapor pressure: < 0.03 hPa at 20 °C
Density: 1.15 g/cm3 at 20 °C
Viscosity, Dynamic 500-1000 CPS
Solubility in Water Insoluble - Reacts slowly with water to liberate C02 gas
Evaporation rate: Not determined
10. Stability and Reactivity
Corrosion to metals:
Corrosion effect on metals are not anticipated
Chemical Stability:
Stable under normal conditions.
Conditions to avoid:
Heat, flames and sparks. Protect from freezing.
Materials to avoid: