User's Manual
User Manual
version 3.2
Move series radiocontrols
mod.
GENESIS, PAIL, BRICK
and
T
April 2016
REM
device
®
- ITALY 25
TECHNICAL SPECIFICATIONS
Full-Duplex multi-band operating frequency:
433.050 – 434.790 MHz/ Channel spacing 25kHz/ No. of channels 60
869.700 – 870.000 MHz/ Channel spacing 25kHz/ No. of channels 12
902 – 928 MHz/ Channel spacing 500kHz/ No. of channels 51
The frequency band varies depending on the standards in the
country where the product is due to be used.
Hamming code distance: > 4
Response time to commands: 20 ms min, 80 ms max
(according to the model)
Active emergency stop command response time: 20 ms
Command passive emergency response time: 1 s
Command PL Category SIL PL
(EN ISO 13849-1)
STOP e 4 3
Button/Lever (UMFS) c 2 1 SIL
(EN IEC 62061)
Joystick (UMFS) d 3 2
Range: 100 m
(≈330 ft)
Operating and storage temperature: -20°C to +70°C
(-4°F to +158°F)
Transmitter unit
Housing protection rating: IP 65 - Material: PA6 GF
Model
Dimensions [mm]
[in]
(L×H×P)
(L×W×H)
Weight [g]
[lb]
(depending on the configurations)
GENESIS 310 × 193 × 163
(12.2 × 7.6 × 6.42)
1580
3.48
PAIL 200 × 135 × 130
(7.87 × 5.31 × 5.12)
930
2.05
BRICK 97 × 210 × 44
(3.82 × 8.27 × 1.73)
470
1.04
T
3,5,7
83 × 174 × 42
(3.27 × 6.85 × 1.65)
350
0.77
User Manual
version 3.2
Move series radiocontrols
mod.
GENESIS, PAIL, BRICK
and
T
April 2016
26
REM
device
®
- ITALY
Battery low advance warning and operating autonomy at 20°C
(68°F)
Model
Advance
warning time
External battery
(removable)
Internal battery
(rechargeable)
Internal battery
(not rechargeable)
GENESIS
non-stop
24/7
≈ 20 mins
≈ 22 hrs
Type: NB-7L – Li-Ion
7.4V 1000 mAh
≈ 1 hour
Type: 3 × Size AAA
1.2V Ni-MH
NOT available
GENESIS
≈ 30 mins
NOT available
≈ 30 hrs
Type: 3 × Size AA
1.2V Ni-MH
NOT available
PAIL
≈ 30 mins
NOT available
≈ 30 hrs
Type: 3 × Size AA
1.2V Ni-MH
NOT available
BRICK
≈ 30 mins
NOT available
≈ 30 hrs
Type: 3 × Size AA
1.2V Ni-MH
NOT available
T
3,5,7
≈ 30 hrs
NOT available
NOT available
≈ 1000 hrs
Type: Size D
Lithium 3.6V 19 Ah
Receiver unit
Radiofrequency receiver: Single Chip
Antenna
(according to model)
:
integrated or external
(with automatic selection)
Rp1, Rp2 relay contact capacity: 8A (DC1/AC1)
*
/ 115V
(RUBYBOX and ECOBOX)
Command relay contact capacity: 4A (DC1/AC1)
*
/ 115V
(RUBYBOX and DIN)
Stop relay contact capacity: 4A (DC1/AC1)
*
/ 115V
*
the same current can be supported also in category DC13 (inductive load)
connecting a diode in parallel to the load. For use in category AC15, we
recommend connecting a suitable RC circuit in parallel to the load for extra
voltage damping. (Ref. IEC/EN60947).
Power supply
(depending on model):
DC 12-24V ±25% or AC 24-115V ±10%
RUBYBOX move: waterproof enclosure for external installation
Material: PA6 GF V0 - Degree of protection: IP65
Dimensions: 166 × 279 × 91 mm (L×W×H)
6.53 × 10.98 × 3.58 in
ECOBOX move: waterproof enclosure for external installation
Material: PA6 GF V0 - Degree of protection: IP65
Dimensions: 129 × 178 × 51 mm (L×W×H)
2.08 × 7.01 × 2.01 in
DIN move: ModulBox housing to be fitted on DIN EN 50022 rail
Material: ABS - Degree of protection: IP20
Dimensions: 158 × 90 × 75 mm (L×W×H)
6.22 × 3.54 × 2.95 in