User's Manual

User Manual version 3.2
Move series radiocontrols mod. GENESIS, PAIL, BRICK and T April 2016
REM device ® - ITALY 13
Models: FCC-IC
Band 902.5 – 915 MHz
CH1
902,5
CH2
903,0
CH3
903,5
CH4
904,0
CH5
904,5
CH6
905,0
CH7
905,5
CH8
906,0
CH9
906,5
CH10
907,0
CH31
907,5
CH12
908,0
CH13
908,5
CH14
909,0
CH15
909,5
CH16
910,0
CH17
910,5
CH18
911,0
CH19
911,5
CH20
912,0
CH21
912,5
CH22
913,0
CH23
913,5
CH24
914,0
CH25
914,5
Models: FCC-IC (…continues)
Band 915.0 – 927.5 MHz
CH26
915,0
CH27
915,5
CH28
916,0
CH29
916,5
CH30
917,0
CH31
917,5
CH32
918,0
CH33
918,5
CH34
919,0
CH35
919,5
CH36
920,0
CH37
920,5
CH38
921,0
CH39
921,5
CH40
922,0
CH41
922,5
CH42
923,0
CH43
923,5
CH44
924,0
CH45
924,5
CH46
925,0
CH47
925,5
CH48
926,0
CH49
926,5
CH50
927,0
CH51
927,5
Signalling the signal level received
Available only for models with the display option (GENESIS, PAIL and
BRICK), reporting shows the signal intensity that the base unit receives the
transmitter with and takes place through 15 bars that light up in sequence.
User Manual version 3.2
Move series radiocontrols mod. GENESIS, PAIL, BRICK and T April 2016
14 REM device ® - ITALY
To activate this function:
a) power up the transmitter using the mushroom EMERGENCY STOP
BUTTON (or using the key selector, where applicable);
b) activate Sp3 or U1 together with START; keep on and count 2 beeps
and flashes of the F1 LED (if any);
If no signalling takes place, "FAIL" is displayed.
Wired control option
The wired control connection is an option available only for transmitters
GENESIS and PAIL with receivers ECOBOX and RUBYBOX.
Activating the wired control
• Switch off both the transmitter (GENESIS or PAIL) and receiver (ECOBOX
or RUBYBOX).
• Remove the protection caps from the connectors.
• Connect the cable supplied paying attention to the white mark on the
connectors.
GENESIS transmitter unit PAIL transmitter unit
ECOBOX receiver unit
RUBYBOX receiver unit