User's Manual

User Manual version 3.2
Move series radiocontrols mod. GENESIS, PAIL, BRICK and T April 2016
REM device ® - ITALY 15
• Fix the cable using the Velcro strap supplied:
o on the transmitter handle
o on the receiver output cable
E xample of the fixed cable on:
 PAIL transmitter unit
 ECOBOX receiver unit
• Power the receiver and start the transmitter.
Wired control operation
When the wired control is working, radio transmission is disabled and data
is transmitted via the wire in both directions (control and data feedback
functions) as per normal operation.
Supply of the transmitter takes place via the power cable that recharges
the internal accumulators too.
Deactivating the wired control
• Switch off both the transmitter (GENESIS or PAIL) and receiver (ECOBOX
or RUBYBOX).
• Disconnect the cable supplied removing the Velcro straps.
• Reposition the protection caps on the connectors.
• Power the receiver and start the transmitter.
WARNING:
Pull the plugs with the cable perpendicular to the socket. If the cable is
bent in any direction, the plug does not separate from the socket!
(See the figure on the next page)
User Manual version 3.2
Move series radiocontrols mod. GENESIS, PAIL, BRICK and T April 2016
16 REM device ® - ITALY
MAINTENANCE
Transmitter supply
The transmitter supply varies according to the models and version
purchased.
Model Power supply types
GENESIS
Internal accumulators with induction recharge or
rechargeable removable battery
PAIL Internal accumulators with induction recharge
BRICK Internal accumulators with induction recharge
T 3,5,7 Long-life non-rechargeable internal lithium battery
90°