Technical information

11
Water contents ltr 7.5
Water resistance at 11 °C dt
mbar 460
Water resistance at 20 °C dt
mbar 140
Nominal flow at 11 °C dt
l/s 1.74
Nominal flow at 20 °C dt
l/s 0.96
Electrical
Main supply V/Hz 230 / 50
Electric rating without pump (max) W 30 - 160
Insulation class IP 20
Table 01 Technical data Remeha Quinta 85
*) DIN 4702, part 8
3.3 General Specification
(to be read with above table)
- One piece cast aluminium heat exchanger.
- 1¼” BSP (m) flow and return connections.
- ¾” BSP (m) gas connection.
- Maximum operating pressure of 4.0 bar.
- Maximum operating temperature of 95°C.
- Low NO
x
(max 27 ppm, O
2
= 0%, dry) DIN 4702, part 8.
- Pre-mix, fully modulating (18 -100%) gas burner with gas/air ratio control for
maximum efficiency.
- Intelligent advanced boiler control ‘abc’ c/w a comprehensive operating, service
and fault diagnostic facility.
- Available for conventional flue or room sealed operation.
- Capable of remote BMS (0 -10V, on/off and High/low control options).
- Supplied fully factory assembled.
- Powder coated enamel steel casing.
- Suitable for use with a Natural gas as standard or propane (with boiler parameters
change and included restrictor, also see the included “Assembly instructions
Propane set” )
- Supplied as standard with safety interlock facility, temperature indication, control
and high limit sensors, common alarm and boiler run indication.
- Efficiency of 98% at 80/60°C (H
i
).
- Max efficiency of 108% (H
i
) in fully condensing mode.
- Manufactured to ISO 9001.
- CE approved.