® BRANCH WIZARD ® E L F_ _ _PSR_ _ _._IASLAW MODEL DPS-1 : '111409-01 erating this Pole Saw. usethis of Pole Sawbefore can cause severe injury. IMPORTANT: Read andImproper understand manual assembling or op* Keep this manual for future reference.
.... _j "4 _..... DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit www.remingtonpowertools.com This manual is your guide to safe and proper operation of the saw. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Pars m&s informaci6n, wwworemingtonpowertools.
CONTIENT.._ IMPORTANT SAFETY INFORMATION ............................................................................................ 4 Belore Operating Saw ................................................................................................... 4 Whi_e Operating Saw ........................................................................................ 4 Kickback .........................................................................................................................
IMP_OI?JANT SA FET¥ !NFOR MATION Before operating F'ole Saw. make certain you read and understand al! Important Safety h!p_rmation 9 _k WARNING: When using an electric Pole Saw, basic safety precautions shouldRiways be followed to reducethe risk of °re, electric shock, and injury to persons, includinq the following: ..... READ ALL INSTRUCTIONS° Make sure you read and uoderstarjd.
_PORTANT SAFETY INFORMATION f 2 Do not force Pole Saw while cutting Apply light pressure It will do the job bette_ and safer at the rate for t_hich it was intended KICKBACK t3 When cutting a limb that is under tension, use extreme cm, tion Be alert for wood springing back When wood tension is released, limb could spring back and strike operator causing severe injury or death t4 Cant Pole Saw from one place to another • with mill unplugged .
IMPORTANT SAFETY INFORMATION POLE SAW TRIMMING PRECAUTIONS Keep other persons away from cutting end of Pole Saw and at a safe distance from work area._ Never stand directly under the limb you are trimming..Always position yourself out of the path of falling debris. Do not use Pole Saw near cable, electric power or telephonelines.
PJ ,ODUP-.TA N MODEL DPS-1: 111409-01 Guide Bat \ 4, POSe \\ \ S_w Chain Trigger Swilch CHAIN SAW NAMES AND TERMS Guide Bar Metal bar that c×tends from saw body Yhe guide bar supports and guides chain Kickback Quick backward and upward motion of guide bar Kickback may occur when tip of guide bar touches an object while chain is moving "fhe guide bar wil! kick up and back towards operator Saw Chain (Chain) [_op of chain having cutting teeth for curling wood The motor drives chain, The guide bar suppo
A_EMBLY 1 IMPORTANT: Read and understand this manual before assembling or operating this Pole Saw° Improper use of Pole Saw can cause severe injurg, Keep this manua! forfutur_ r_f_r_nee_ __ Note: Some models are pre-assembied Assembly is not needed on these models See &_, Chain Ten_ionAdjustment / backwards, I_backwards_ CAUTION: If chain Do not is place chain on saw saw [ wi!l vibrate badly and will not cut.
_!N TENS!ON ADJUST_ Gui_B Bar Nul _.._,_. I p_oow_rAsRoNul rNcGjUnplug before LGhaimtension, Pole Saw from adjusting saw I_ edges WARNING: I are sharp° Cutting Use protective on chain gloves when Lban__ WARNING: Maintain proper chain tension always,, A loose chain will increasethe risk of kickback° A loose chain may jump out of guide bar groove,, This may injure operator and damage chain.
OPERATING POLE_SAW ,6 _ILI_G CHAIN _s l ale Saw requires lubrication only to prevent The saw chain provided is pro-lubricated at the factory With each use of the Pole Saw apply a small amount of lubricating oil directly to the saw chain (see Figure 8) The oil wil! distribute itself around the chain and guide bar groove during use-preventing rust We recommend using SAE #30 motor oil for lubrication and rust prevention uW RNING ors ndthm rust on,Spole the guide bar and saw chain owne mane dandun , 'o%op&
OPERATING POLE_SAW_ pUJ-I'ING3NIT]-i THE POLE SAW_ r.o|inect 2 t_ole haw tO extcnslon cord TRIMMING ° Conncc{ A TREE (PRUNIN_G___ extension co_d to power supply '1_ WARNING:Avoid kickback. Kickback Use both hands to grip Pole Saw Use only _t, rt result in severe injury or death. See designated grip areas when operating Pole Saw tCKOaCKto avoid risk of kickback.
CLEA___NCE rnal Guide, Bar Maiotf_nance L_emove gu_oe par trom vote _aw 2 Remove sawdust fromguide bar groove pedodicaIly Use putty knife or wire (see Figure 13) 3, Clean oil slots after eacb day of use 4. Remove burrs from sides of guide bar Use flat file to m_e side edges square Replace guide bar when • bar is bent or cracked • inside groove of bar is badly worn NOTICE: Below are instructions for servicing your Pole Saw,.
r- AINT_ENANCE SHARPENING Depth Gauge (right side o!or.ha ]t_)_) SAW CHAIN t G,oo _;,",/ Groove ,, \ power source before servicing° Severe injury or death could occur from electriWARNING: Unplug Pole Saw from 1 cal shock or body contact with moving _cbaJtL R_ghlSid_ or Chain d_ WARNING: Cutting edges are sharp. Use protective handling chain. Figure 15 - Chain Part Locations on chain gloves 4 when Keep chain sharp. Your Pete Saw wil! cut faster and more safely.
_eEPLACING SAW CHAIN REPLACEMENT place cIlam wtaencutters are tooworn to sharpen or when chain b_'_s Onfy use replacement chain notex.lin this mmmal Always include new drive sprocket when replacing chain. 1"his will maintain proper driving of chain Note: For proper chain mad drive sprocket, see llhcstrztted Part.
WARRANTY REMINGTON I NF:ORMA.TJON BRAND ELECTRIC CHAIN SAW I IMtTFD WA R_A NTIFR ............. NEW-PROBEt&T-S Standard-Warranty DESA Power'Tools wamants this _ew product and any parL_ thereof to Ix: fn:e from dereeL'; in malcria] aI:_dwor|:ffc_qship for a period of oue (1 year from the date of first pur_ba._efrmn an authori:,_:d dealer pmvid:d the product ha.
