Owner's Manual

How To Load And Unload (cont’d)
TO UNLOAD THE FIREARM:
WARNING!
Your Premier
®
shotgun has automatic ejectors. While still controlling the direction of the muzzle, position the chambers
to eject the fired shells in a direction away from your face.
4. Any fired shell will be automatically ejected from the firearm when the action is fully opened.
(See
Picture 11).
5. An unfired shell will be partially extracted from the chamber and may be removed by hand.
WARNING! Always check the chambers to make sure there are no shells in the firearm.
WARNING! Once you have unloaded the shotgun, check to make sure that both barrels are free of obstructions.
Disassembly Instructions
WARNING! Before any disassembly, make sure the firearm is completely unloaded.
TO DISASSEMBLE:
1. Point the firearm in a safe direction.
2. Pull the safety mechanism rearward to the ‘SAFE’ position so the letter ‘S’ shows.
3. Open the action to make sure there are no shells in the firearm.
4. Close the action.
5. Push the fore-end latch rearward. (See
Pictur
e 7
).
6. Pull the front of the for
e-end assembly away fr
om the barrel slightly.
7. Move the fore-end forward towards the muzzle and remove the fore-end assembly from the firearm.
8. Push the rear of the top lever to the right to unlock the action.
9. Rotate the barrel assembly downward as far as possible to open the action.
12
Picture 11