Microflex R_200_400_IB 8/24/06 2:34 PM Page 1 ® ® MC 400 Use and Care Guide R-200 R-225 R-400 (shown)
Microflex R_200_400_IB 8/24/06 2:34 PM Page 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be observed, including the following. Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: ■ Do not reach for an appliance that has fallen into water. Unplug it immediately. ■ Do not use while bathing or in the shower. ■ Do not place or drop into water or other liquid.
Microflex R_200_400_IB 8/24/06 2:34 PM Page 4 Product Features Congratulations on your purchase of a premium Remington® shaver, with revolutionary shaving technology Shaver Parts (A) Which model is yours? Pouch Corded Cordless Operation Operation (B) (D) (C) (A) Head & cutter assembly (B) ON/OFF button (C) Power port (D) Trimmer button (E) Head guard (F) Cleaning brush (G) Storage pouch (Model R-225 & R-400) (H) Power cord (H) Charge Time Locking Trimmer 30 min. 16 hrs.
Microflex R_200_400_IB 8/24/06 2:34 PM Page 6 Usage Tips How to Use Before using read the important safety instruction section in front of the manual. Removing the Headguard Before operating your shaver, remove the headguard, which protects the head and cutter assembly. It is important to remove the headguard correctly to avoid damaging the clips that hold it to the shaver. 1. Press lightly on the top of the head guard. 2. Lift the lower rear edge. 3. Pull the headguard away from the shaver.
Microflex R_200_400_IB 8/24/06 2:34 PM Page 8 Cleaning and Maintenance To assure smooth, efficient performance, it is important to clean your shaver. Daily Brush inside the head assembly after each use: 1. Turn the shaver off. 2. Grip the head assembly by the three ridges and pull it off the shaver. 3. Use the cleaning brush to sweep out the internal part of the head assembly and the hair pocket area, where 3 shaver spindles are located. 4. Replace head assembly.
Microflex R_200_400_IB 8/24/06 2:34 PM Page 10 Battery Disposal Battery Removal (R-400 only) When your rechargeable shaver reaches the end of its useful life, the batteries must be removed from the shaver and be recycled or disposed of properly in accordance with your local and state requirements. The following procedures should be followed for battery removal: ■ Make sure your shaver is unplugged from any outlets, so you don’t risk an electrical shock.
Microflex R_200_400_IB 8/24/06 2:34 PM Page 12 Warranty Service R-200, R-225 120 VAC, 60 Hz Dist. by: Spectrum Brands, Inc., Madison, WI 53711 R-400 105-130 VAC, 60 Hz 105-240 VAC, 50 Hz Dist. by: Rayovac Canada Inc., Mississauga, ON L4W 2T7 Questions or comments: Call 800-736-4648 in U.S. or 800-268-0425 in Canada. Or visit www.remingtonproducts.com REMINGTON & MICROFLEX and EASY-VIEW are trademarks of ROVCAL, INC. © 2006 ROVCAL, INC.