User Manual

PARTS

1. On/o switch

2. Pivoting head and cutter assembly

3. Flexing heads

4. Hairpocket

5. Detail trimmer

6. Trimmer release button

7. Charging indicator light

8. Power connector

Not shown

9. Adaptor

10. Cleaning brush

11. Stubble head guard

GETTING STARTED

CHARGING

• It is recommended to fully charge your appliance before using it for the rst time.

• Ensure the product is switched o.

• The adaptor automatically adjusts to a main voltage between 100V and 240V.

• Connect the shaver to the adaptor and then to the mains.

• The indicator light below the power switch will light up red to indicate the shaver is

charging.

• Charge time for the battery from empty to full charge is 16 hours.

• Run time from fully charged is up to 40 mins.

• Note: To preserve the life of your batteries, let them run out completely every 6

months and then fully charge.

• Do not recharge your shaver after each use as this will shorten the life of the battery.

INSTRUCTIONS FOR USE

SHAVING

1. Slide the power switch to turn on.

2. Stretch the skin with your free hand so the hairs stand upright.

3. Only apply light pressure on the shaving head while shaving (pressing too hard can

damage the heads and make them vulnerable to breakage).

4. Use short, circular strokes.

TRIMMING

1. Push the trimmer button to release the detail trimmer.

2. Hold the trimmer at a right angle to your skin.

3. Place the trimmer at desired trim line for a quick, easy professional trim.

4. To retract the trimmer, push down until it locks into position.

STUBBLE LOOK

• Fit the stubble head guard to your shaver for a 3-day stubble look.