Product Manual

CLEANING AND MAINTENANCE

REPLACING SAW CHAIN

Replace chain when cutters are too worn to

sharpen or when chain breaks. Only use replace-

ment chain noted in this manual. Always include

new drive sprocket when replacing chain. This

will maintain proper driving of chain. Note: For

proper chain and drive sprocket, see Replacement

Parts and Accessories.

STORAGE

If storing saw tk)r more than 30 days, follow steps

below:

1. Drain oil tank after each use.

2. Remove and clean guide bar and chain. Clean

guide bar and chain by soaking in petroleum

based solvent or mild soap and water mix-

ture.

3. Dry guide bar and chain.

4. Place chain in container filled with oil. This

will prevent rust.

5. Wit_ a thin coating of oil over surface of guide

b_u'.

6. Wipe off outside of saw body. Do this with soft

cloth daml_ned with amild soap ;rod water mix-

ture.

7. Store chain saw

* in a high or locked place, out of chiMren's

math

* in a dry place

REPLACEMENT PARTS

AND ACCESSORIES

,_k WARNING: Use only replacement

parts and accessories described in this

manual. Use of other parts or accessories

could damage saw or injure operator.

For original replacement parts and accessories,

call 1-866-206-2707 (in Canada call 1-877-696-

5533) or visit www.remingtonpowertools.com.