Product Manual

REPAIR SERVICE

Note: Only use original replacement parts. This will

protect your warranty coverage for parts replaced

under warranty.

For service, please call the Customer Support

Department to obtain a list of authorized service

dealers near you. Service on this unit, both within

and after the warranty period, should only be

performed by an authorized and approved service

dealer.

Call 1-866-206-2707 (in Canada call 1-877-696-

5533) or visit www.remingtonpowertools.com.

WARNING: Use only replacement

parts and accessories described in this

manual. Use of other parts or accessories

could damage saw or injure operator.

REPLACEMENT PARTS AND

ACCESSORIES

For original replacement parts and accessories, call

1-866-206-2707 (in Canada call 1-877-696-5533)

or visit www.remingtonpowertools.com.

STORAGE

If storing saw for more than 30 days, follow steps below.

1. Drain oil tank.

2. Remove and clean guide bar and chain. Clean

guide bar and chain by soaking in petroleum

based solvent or mild soap and water mixture.

3. Dry guide bar and chain.

4. Place chain in container ﬁlled with oil. This will

prevent rust.

5. Wipe a thin coating of oil over surface of guide bar.

6. Wipe off outside of saw body. Do this with soft cloth

dampened with a mild soap and water mixture.

7. Store chain saw

• in a high or locked place, out of children’s reach

• in a dry place

• in a carrying case or with scabbard over guide bar

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or

when chain breaks. Only use replacement chain noted in

this manual. Always include new drive sprocket when

replacing chain. This will maintain proper driving of

chain. Note: For proper chain and drive sprocket,

see Replacement Parts and Accessories.