Cut Sheet

Remke Industries
310 Chaddick Drive
Wheeling, IL 60090
Phone: [phone] • Fax: [phone]
Email: [e-mail] • Website: http://www.remke.com
All Categories>Tuff-Seal™>Cord Connectors / Cord Grips>RSSS Series Stainless Steel Corrosion-Resistant Cord
Connectors >Cord Grip Complete Assembly>Item # RSSS-108
Item # RSSS
-
108, Cord Grip Complete Assembly
QUOTE
larger image
Cord Grip Complete Assembly
The Tuff Seal RSSS series of corrosion-resistant cord connectors feature a body and
compression nut made of Type 304 stainless steel with exceptional tensile strength and
the highest levels of durability in severely corrosive environments filled with saltwater,
acids or chemicals. These connectors are recommended for use in washdowns or high
moisture environments in food processing plants, petrochemical facilities, wastewater
treatment plants, pulp & paper mills and chemical manufacturing factories.
All RSSS connectors meet either IP 67 or IP 68 standards. They can be ordered with or
without wire mesh attachments and accommodate conduit sizes from 3/8
” to 2 1/2”.
The combination tightening surface on RSSS Corrosion-Resistant Connectors is a unique
Remke design that provides a large wrenching area for easy installation. And the knurl
section offers users an extra gripping surface for initial hand tightening.
These connectors are UL Listed, CSA Certified and ROHS Compliant.
Dimensions
Page
1
of
2
Remke Industries, Inc.
-
Item # RSSS
-
108, Cord Grip Complete Assembly
7/11/2011
http://remke.thomasnet.com/printitem/all
-
categories/cord
-
grip
-
complete
-
assembly
-
1025/rs
...