Cut Sheet

Remke Industries
310 Chaddick Drive
Wheeling, IL 60090
Phone: [phone] • Fax: [phone]
Email: [e-mail] • Website: http://www.remke.com
All Categories>Tuff-Seal™>Cord Connectors / Cord Grips>RSSS Series Stainless Steel Corrosion-
Resistant Cord Connectors >Cord Grip Complete Assembly>Item # RSSS-310
Item # RSSS
-
310, Cord Grip Complete Assembly
QUOTE
larger image
Cord Grip Complete Assembly
The Tuff Seal RSSS series of corrosion-resistant cord connectors feature a
body and compression nut made of Type 304 stainless steel with exceptional
tensile strength and the highest levels of durability in severely corrosive
environments filled with saltwater, acids or chemicals. These connectors are
recommended for use in washdowns or high moisture environments in food
processing plants, petrochemical facilities, wastewater treatment plants, pulp &
paper mills and chemical manufacturing factories.
All RSSS connectors meet either IP 67 or IP 68 standards. They can be
ordered with or without wire mesh attachments and accommodate conduit
sizes from 3/8” to 2 1/2”.
The combination tightening surface on RSSS Corrosion-Resistant Connectors
is a unique Remke design that provides a large wrenching area for easy
installation. And the knurl section offers users an extra gripping surface for
initial hand tightening.
These connectors are UL Listed, CSA Certified and ROHS Compliant.
Specifications
Conduit Size 1 inches
Cable Range 0.500 - 0.625
UPC 785411 81661
Cord Grip Accessories
Locknuts
O-Rings
Page
1
of
1
Remke Industries, Inc.
-
Item # RSSS
-
310, Cord Grip Complete Assembly
7/11/2011
http://remke.thomasnet.com/printitem/all
-
categories/cord
-
grip
-
complete
-
assembly
-
1025/rs
...