Operation Manual

A symbol is shown on the display to indicate that the settings are being transferred.

Button functions

By pressing the ON / OFF button, you can activate or deactivate your

unit. The programmed settings and adjustment values before the unit

was turned off will appear on the display.

ON/OFF Button

ON/OFF ON/OFF

/ Button

The remote control has its own temperature display. If buttons / are

pressed alternately, the display changes to . The button  can be used

to reduce the desired nominal temperature, the  button can be used

to increase it. This adjustment is only possible in coolingand heating

mode. In automatic mode, the ﬁxed temperature of 24°C is preset.

The current setting is shown next to the temperature display.

In dehumidiﬁcation mode, no temperature adjustment can be made.

Cooling /

heating

mode

 



MODE Button

Use the MODE button to select between the individual operating modes.

5 modes are available:

1. Automatic automatic selection of cooling or heating operation

2. Cooling predominantly summer operating mode

3. Dehumidiﬁcation Summer or winter operating mode

4. Heating predominantly winter operating mode

5. Air circulation only for circulation of air

MODE

Automatic Cooling

Heating

Air circulation

Dehumidifying

MODE MODE MODE MODE

REMKO ATY