User's Manual
1C - Main Features
1D
 - Model Types
1 button dip-switch transmitter:  Model #: RCS-433MDR1
2 - CODING 
Using a coin, insert and twist to access to the battery and the
dip-switches. The
 dip-position will give the security code.
Warning:Each transmitter is set-in-factory with the same code on
the
 dip-switches; it highly advisable to change this code by moving
the
 dip-switches to any random position ( “+”, “0” , “-”).
3 - MEMORIZATION
Each dip-switch setting code has to be stored into the receiver
memor
y. The memorization can be done by self-learning. The
instructions
 for this operation is given on the receiver installation
manual.
 Your own installer will perform this operation during 
the
 installation or will give you the necessary explanation 
during
 installation.
4 - BATTERY AND DIP-SWITCH ACCESS 
To access the battery, Using a coin, insert 
and twist. Place
 the 23A alkaline 
battery
 between the 2 contacts. 
Respect
 the right polarity as indicated 
on
 the bottom of the box. 
NOTE:Please dispose of the battery 
cor
rectly, they are hazardous waste.   
5 - TROUBLESHOOTING
The radio signal is not verifiable Replace the transmitter battery
The
 transmitter led doesn't switch on Replace the transmitter battery
The
 radio signal is not verifiable Check the power supply of
the receiver
The transmitter led switches on Replace the transmitter battery
GUARANTEE
The
 guarantee period of all RCS transmitters is 12 months, 
beginning
 from the manufacturer date. During this period, 
if
 the product does not work correctly, due to a defective 
component,
 the product will be repaired or substituted 
at
 the discretion of RCS. The guarantee does not cover 
the
 plastic container integrity. After-sale service is supplied 
at
 the producer's factory.
REMOTE
 CONTROL SOLUTIONS, LLC
1-866-770-0727
ww
w.rcsremotes.com
RCS-433MDR1  FCC ID: TG6RCS433MDR
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the
following two conditions:
1)
 This device may not cause harmful interferences; and
2) this device must accept any interference received, including interference that may cause undesired operation
Notice:Any changes or modification to RCS equipment not 
expressly approved by RCS could void the user's authority to 
operate the equipment.
Red LED
Button
Dip-Switch
Battery


